Owner's Manual

Chapter 5. Network Maintenance | 57
N300 Wireless ADSL2+ Modem Router DGN2200
Restore
1. Enter the full path to the file on your network, or click the Browse button to find the file.
2. When you have located the .cfg file, click the Restore button to upload the file to the modem
router.
Upon completion, the modem router reboots.
Erase
Click the Erase button to reset the modem router to its factory default settings. Erase sets the
password to password, the LAN IP address to 192.168.0.1, and enables the modem router’s
DHCP.
View Router Status
Select Maintenance > Router Status to display
this screen. The Router Status screen provides
status and usage information.
Hardware and Firmware Version. The model
of the hardware and the currently running
firmware version.
GUI Language Version. The currently selected
language.
Internet Port Settings
MAC Address. The Ethernet MAC address of
the DSL port.
IP Address. The DSL port IP address. If no
address is shown, the modem router cannot
connect to the Internet.
Network Type. The value depends on your ISP.
IP Subnet Mask. The DSL port IP subnet mask.
Gateway IP Address. The IP address used as a
gateway to the Internet for computers configured
to use DHCP.
Domain Name Server. The modem router DNS
server IP addresses. These addresses are
usually obtained dynamically from the ISP.