Owner's Manual

Appendix B. NETGEAR VPN Configuration | 155
N300 Wireless ADSL2+ Modem Router DGN2200
b. Expand the Authentication
subheading by double-clicking its
name or clicking the + symbol.
Then select Proposal 1 below
Authentication.
c. In the Authentication Method
drop-down list, select Pre-Shared
Key.
d. In the Encrypt Alg drop-down
list, select the type of encryption.
In this example, use Triple DES.
e. In the Hash Alg drop-down list,
select SHA-1.
f. In the SA Life drop-down list,
select Unspecified.
g. In the Key Group drop-down list, select Diffie-Hellman Group 2.
6. Configure the VPN Client Key Exchange Proposal.
In this step, you provide the type of encryption (DES or 3DES) to be used for this
connection. This selection has to match your selection in the VPN router configuration.
a. Expand the Key Exchange
subheading by double-clicking its
name or clicking the + symbol.
Then select Proposal 1 below Key
Exchange.
b. In the SA Life drop-down list,
select Unspecified.
c. In the Compression drop-down
list, select None.
d. Select the Encapsulation
Protocol (ESP) check box.
e. In the Encrypt Alg drop-down
list, select the type of encryption.
In this example, use Triple DES.
f. In the Hash Alg drop-down list, select SHA-1.
g. In the Encapsulation drop-down list, select Tunnel.
h. Leave the Authentication Protocol (AH) check box cleared.
7. Save the VPN Client settings.
From the File menu at the top of the Security Policy Editor window, select Save.
After you have configured and saved the VPN client information, your PC automatically
opens the VPN connection when you attempt to access any IP addresses in the range of
the remote VPN router’s LAN.
8. Check the VPN connection.