Owner's Manual

154 | Appendix B. NETGEAR VPN Configuration
N300 Wireless ADSL2+ Modem Router DGN2200
a. In the Network Security Policy list on the left side of the Security Policy Editor window,
click My Identity.
b. Select None in the Select Certificate field.
c. Select Domain Name in the ID Type field, and enter toGW_A.com (in this
example). Select Disabled in the Virtual Adapter field.
d. In the Internet Interface section, select Intel PRO/100VE Network Connection (in
this example; your Ethernet adapter might be different) in the Name field, and then
enter 192.168.2.3 (in this example) in the IP Addr field.
e. Click the Pre-Shared Key button.
f. In the Pre-Shared Key screen, click Enter
Key. Enter the DGN2200’s pre-shared key
and click OK. In this example, 12345678 is
entered, though the screen shows asterisks.
This field is case-sensitive.
5. Configure the VPN Client Authentication
Proposal.
In this step, you provide the type of encryption
(DES or 3DES) to be used for this connection. This selection has to match your selection
in the VPN router configuration.
a. In the Network Security Policy list on the left side of the Security Policy Editor window,
expand the Security Policy heading by double-clicking its name or clicking the +
symbol.