Owner's Manual

Chapter 1. Hardware Setup | 15
N300 Wireless ADSL2+ Modem Router DGN2200
2. Use the included phone cable with RJ-11 jacks to connect the ADSL port (A) of the modem
router to the ADSL port (B) of the two-line ADSL microfilter.
B
A
Figure 7. Cable the modem modem router to the microfilter
3. Connect the Ethernet cable from a modem router LAN port (C) to an Ethernet port (D) in
your computer
D
C
.
Figure 8. Connect the Ethernet cable
4. Plug the power adapter into the AC power adapter input (labeled Power), and plug the other
end into a power outlet.
5. Connect any additional wired PCs to your modem router by inserting an Ethernet cable from
a PC into one of the three remaining LAN ports.