Manualshelf

Owner's Manual

ManualsBrandsNetgear ManualsModemsNetgear DGN2200v1
141142143144145146147148149150
Appendix B. NETGEAR VPN Configuration | 143
B
B. NETGEAR VPN Configuration
This appendix is a case study on how to configure a secure IPSec VPN tunnel from a NETGEAR
DGN2200 to a FVL328. This case study follows the VPN Consortium interoperability profile
guidelines (found at http://www.vpnc.org/InteropProfiles/Interop-01.html).
Configuration Profile
The configuration in this appendix follows the addressing and configuration mechanics
defined by the VPN Consortium. Gather necessary information before you begin
configuration. Verify that the firmware is up to date, and that you have all the addresses and
parameters to be set on both sides. Check that there are no firewall restrictions.
Table 9.
VPN Consortium
Scenario
Scenario 1 (Identity Using Preshared Secrets)
Type of VPN LAN-to-LAN or gateway-to-gateway (not PC/client-to-gateway)
Security scheme: IKE with preshared secret/key (not certificate based)
IP addressing:
NETGEAR-Gateway A Static IP address
NETGEAR-Gateway B Static IP address