Owner's Manual

14 | Chapter 1. Hardware Setup
N300 Wireless ADSL2+ Modem Router DGN2200
microfilter into the wall outlet, plug your phone equipment into the jack labeled Phone, and
plug the modem router into the jack labeled ADSL.
Plugs into the DSL line
Figure 5. Two-line ADSL microfilter with built-in splitter
Summary
• One-line ADSL microfilter. Use with a phone or fax machine.
• Splitter. Use with a one-line ADSL microfilter to share an outlet with a phone and the
modem router.
• Two-line ADSL microfilter with built-in splitter. Use to share an outlet with a phone and the
modem router.
Cable Your Modem Router
The installation guide that came in the box has a cabling diagram on the first page. This
section walks you through cabling with detailed illustrations.
CAUTION:
Incorrectly connecting a filter to your modem router blocks your DSL
connection.
1. Put an ADSL microfilter between the phone
line and the phone as shown here. The
illustration shows a two-line ADSL microfilter
with built-in splitter.
Figure 6. ADSL microfilter between
the phone line and the phone
ADSL microfilter