Owner's Manual

Chapter 8. Virtual Private Networking | 125
N300 Wireless ADSL2+ Modem Router DGN2200
a. Select VPN > VPN Status to display the VPN Status/Log screen. Then click VPN
Status to display the Current VPN Tunnels (SAs) screen:
b. Click Connect for the VPN tunnel that you want to activate. Review the VPN
Status/Log screen (Figure a on page 111) to verify that the tunnel is connected.
Use Manual Policy to Configure VPN Tunnels
As an alternative to IKE, you can use manual keying, in which you need to specify each
phase of the connection. A manual VPN policy requires all settings for the VPN tunnel to be
manually input at each end (both VPN endpoints).