Owner's Manual

Chapter 8. Virtual Private Networking | 109
N300 Wireless ADSL2+ Modem Router DGN2200
The LAN IP address ranges of each VPN endpoint has to be different. The connection will fail
if both are using the NETGEAR default address range of 192.168.0.x.
To configure a gateway-to-gateway VPN tunnel using the VPN Wizard:
1. Log in to Gateway A on LAN A. Select VPN Wizard. Click Next, and the Step 1 of 3
screen displays.
2. Fill in the Connection Name field and pre-shared key fields. Select the radio button for the
type of target end point, and click Next, and the Step 2 of 3 screen displays.
3. Fill in the IP address or FQDN for the target VPN endpoint WAN connection, and click Next..
The Step 3 of 3 screen displays.
4. Fill in the IP Address and Subnet Mask fields for the target endpoint that can use this tunnel,
and click Next.