Quick Reference Guide

Reference Manual for the Model DG834 ADSL Firewall Router
Protecting Your Network 4-11
• LAN Users
These settings determine which packets are covered by the rule, based on their source
LAN IP address. Select the desired option:
• Any — all IP addresses are covered by this rule.
• Address range — if this option is selected, you must enter the Start and Finish fields.
• Single address — enter the required address in the Start fields.
• WAN Users
These settings determine which packets are covered by the rule, based on their destination
WAN IP address. Select the desired option:
• Any — all IP addresses are covered by this rule.
• Address range —if this option is selected, you must enter the Start and Finish fields.
• Single address — enter the required address in the Start fields.
•Log
You can select whether the traffic will be logged. The choices are:
• Never — no log entries will be made for this service.
• Always — any traffic for this service type will be logged.
• Match — traffic of this type that matches the parameters and action will be logged.
• Not match — traffic of this type that does not match the parameters and action will be
logged.