Quick Reference Guide

Wireless ADSL2+ Modem Router DG834Gv5 User Manual
Configuring Your Internet Connection 1-10
v1.0, March 2010
Changing Your ADSL Settings
The default ADSL settings of your modem router work fine for most ISPs. However, some ISPs
use a specific multiplexing method and virtual circuit number for the virtual path identifier (VPI)
and virtual channel identifier (VCI).
If your ISP provided you with a multiplexing method or VPI/VCI number, then enter the setting:
1. From the main menu, select ADSL Settings.
2. In the Multiplexing Method drop-down list, select LLC-based or VC-based.
3. Type a number between 0 and 255 for the VPI. The default is 8.
4. Type a number between 32 and 65535 for the VCI. The default is 35.
5. Click Apply.
Note: For information about how to install ADSL filters, see the NETGEAR Router Setup
Manual.
Note: You must use the Setup Wizard to select the correct country for the default ADSL
settings to work.
Figure 1-7