Quick Reference Guide

ADSL2+ Modem Wireless Router DG834G Reference Manual
B-10 NETGEAR VPN Configuration
v2.0, September 2007
d. Click Show Status. The resulting screen should show Update OK: good:
4. Configure the DG834G v4 as in the gateway-to-gateway procedures using the VPN Wizard
(see “Setting Up a Gateway-to-Gateway VPN Configuration” on page 6-18), being certain to
use appropriate network addresses for the environment.
The LAN addresses used in this example are as follows:1
a. Enter toFVL328 for the connection name.
b. Enter fvl328.dyndns.org for the remote WAN's IP address.
c. Enter the following:
• IP Address: 172.23.9.1
• Subnet Mask: 255.255.255.0
5. Configure the FVL328 as in the gateway-to-gateway procedures for the VPN Wizard (see
“Setting Up a Gateway-to-Gateway VPN Configuration” on page 6-18), being certain to use
appropriate network addresses for the environment.
a. Enter toDG834 for the Connection Name.
b. Enter dg834g.dyndns.org for the remote WAN's IP address.
c. Enter the following:
• IP Address: 10.5.6.1
• Subnet Mask: 255.255.255.0
Figure B-11
Device LAN IP Address LAN Subnet Mask
DG834G v4 10.5.6.1 255.255.255.0
FVL328 172.23.6.1 255.255.255.0