Quick Reference Guide

ADSL2+ Modem Wireless Router DG834G Reference Manual

B-2 NETGEAR VPN Configuration

v2.0, September 2007

Step-By-Step Configuration

1. Configure the DG834G v4 as in the gateway-to-gateway procedures using the VPN Wizard

(see “Setting Up a Gateway-to-Gateway VPN Configuration” on page 6-18), being certain to

use appropriate network addresses for the environment.

The LAN addresses used in this example are as follows:

a. Enter toFVL328 for the connection name.

b. Enter 22.23.24.25 for the remote WAN’s IP address.

c. Enter the following:

• IP Address: 172.23.9.1

• Subnet Mask: 255.255.255.0

Figure B-1

Note: Product updates are available on the NETGEAR website at

http://www.netgear.com.

Unit WAN IP LAN IP LAN Subnet Mask

DG834G 14.15.16.17 10.5.6.1 255.255.255.0

FVL328 22.13.24.25 172.23.9.1 255.255.255.0

Gateway A

22.23.24.25

14.15.16.17

10.5.6.0/24 172.23.9.0/24

172.23.9.110.5.6.1

WAN IP

LAN IPLAN IP

Gateway B

VPNC Example

Network Interface Addressing

DG834G

FVL328