Quick Reference Guide

ADSL2+ Modem Wireless Router DG834G Reference Manual
Virtual Private Networking 6-21
v2.0, September 2007
3. Fill in the connection name and pre-shared key fields. Select the radio button for the type of
target end point, and then click Next to proceed. The Step 2 of 3 screen displays:
4. Fill in the IP address or FQDN for the target VPN endpoint WAN connection, and then click
Next. The Step 3 of 3 screen displays:
5. Fill in the IP Address and Subnet Mask fields for the target endpoint that can use this tunnel,
and then click Next.
Figure 6-22
Figure 6-23
Enter the WAN IP address of the remote
VPN gateway: (for example, 22.23.24.25)
Enter the LAN IP settings of the remote VPN
gateway:
• IP Address (for example, 192.168.3.1)
• Subnet Mask (for example, 255.255.255.0)