Quick Reference Guide

Reference Manual for the Model Wireless ADSL Firewall Router DG834G
NETGEAR VPN Configuration F-13
202-10006-05, June 2005
Figure F-11: ping 172.23.9.1
Note: The pings may fail the first time. If this happens, try the pings a second time.
Configuration Summary (Telecommuter Example)
The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Assure that there are no firewall restrictions.
Table F-1. Configuration summary (telecommuter example)
VPN Consortium Scenario: Scenario 1
Type of VPN: PC/client-to-gateway, with client behind NAT router
Security Scheme: IKE with Preshared Secret/Key (not Certificate-based)
Date Tested: May 2005
Model/Firmware Tested:
Gateway DG834G firmware version v2.10.20
Client NETGEAR ProSafe VPN Client v10.5.1 (build 8)
IP Addressing:
Gateway Fully Qualified Domain Name (FQDN)
Client Dynamic