Quick Reference Guide

Reference Manual for the Model Wireless ADSL Firewall Router DG834G

F-2 NETGEAR VPN Configuration

202-10006-05, June 2005

Figure F-1: Addressing and Subnet Used for Examples

Step-By-Step Configuration

1. Configure the DG834G as in the Gateway-to-Gateway procedures using the VPN Wizard (see

“How to Set Up a Gateway-to-Gateway VPN Configuration“ on page 8-20), being certain to

use appropriate network addresses for the environment.

The LAN Addresses used in this example are as follows.

• DG834G

WAN IP = 14.15.16.17

LAN IP = 10.5.6.1

LAN Subnet Mask = 255.255.255.0

•FVL328

WAN IP = 22.23.24.25

LAN IP = 172.23.9.1

LAN Subnet Mask = 255.255.255.0

a. In Step 1, enter toFVL328 for the Connection Name.

b. In Step 2, enter 22.23.24.25 for the remote WAN's IP address.

c. In Step 3, enter the following:

• IP Address = 172.23.9.1

• Subnet Mask = 255.255.255.0

Note: Product updates are available on the NETGEAR, Inc. web site at

http://kbserver.netgear.com/DG834G.asp.

Gateway A

22.23.24.25

14.15.16.17

10.5.6.0/24 172.23.9.0/24

172.23.9.110.5.6.1

WAN IP

LAN IPLAN IP

Gateway B

VPNC Example

Network Interface Addressing

DG834G

FVL328