Quick Reference Guide

Reference Manual for the Model DG824M Wireless ADSL Modem Gateway
3-10 Connecting the Gateway to the Internet
Note: If, instead of the Setup Wizard menu, the main menu of the gateway’s Configuration
Manager as shown in Figure 3-15 appears, click the Setup Wizard link in the upper left to
bring up this menu.
When the Wizard launches, select Yes in the menu below to allow the gateway to
automatically determine your connection.
Note: You must select a country before clicking Next to proceed with the Setup Wizard.
2. Click Next
The Setup Wizard will now check for the following connection types:
• Dynamic IP assignment
• A login protocol such as PPPoE or PPPoA
• Fixed IP address assignment
Next, the Setup Wizard will report which connection type it has discovered, and then display
the appropriate configuration menu. If the Setup Wizard finds no connection, you will be
prompted to check the physical connection between your gateway and the ADSL line. When
the connection is properly made, the gateway’s Internet LED should be on.
The procedures for filling in the configuration menu for each type of connection follow below.