Quick Reference Guide

Reference Manual for the Model DG632 ADSL Modem Router
Connecting the Modem to the Internet 3-5
Connecting the DG632 to Your Network
This section provides instructions for connecting the DG632 modem router to your network.
Note: The Resource CD included with your modem contains an animated Installation Assistant to
help you through this procedure.
How to Connect the Modem
There are three steps to connecting your firewall:
1. Connect the modem to your ADSL line.
2. Connect the modem to the computers on your network.
3. Log in to the modem.
4. Connect to the Internet.
Follow the steps below to connect your modem to your network. Before you begin, locate the
ADSL configuration information from your Internet Service Provider (ISP).
1. CONNECT THE DG632 TO THE ADSL LINE.
a. You need to install a filter on every telephone or device that shares the same phone
number as your ADSL modem. Select the filter that came with your modem.
Figure 3-3: ADSL microfilters
Note: If you purchased the DG632 in a country where the filter is not included, you must
acquire one.
Phone
Phone
DSL
Line
One-Line Filter
Two-Line Filter
Splitter
With Splitter