User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 937
Default None
Mode Privileged Exec
User Exec
Display Messages
If you do not specify an IP address, a table with the following columns displays for all neighbors or the neighbor
associated with the interface that you specify:
<slot/port>
Interface number.
<vlan-id>
VLAN ID ranges from 1 to 4093.
Fields
Definition
Router ID
Shows the 4-digit dotted-decimal number of the neighbor router.
Priority
Displays the OSPF priority for the specified interface. The priority of an interface
is a priority integer from 0 to 255. A value of '0' indicates that the router is not
eligible to become the designated router on this network.
Intf ID
Shows the interface ID of the neighbor.
Interface
Shows the interface of the local router.
State
Shows the state of the neighboring routers. Possible values are:
• Down - initial state of the neighbor conversation - no recent
information has been received from the neighbor.
• Attempt - no recent information has been received from the
neighbor but a more concerted effort should be made to contact the
neighbor.
• Init - an Hello packet has recently been seen from the neighbor, but
bidirectional communication has not yet been established.
• 2 way - communication between the two routers is bidirectional.
• Exchange start - the first step in creating an adjacency between the
two neighboring routers, the goal is to decide which router is the
master and to decide upon the initial DD sequence number.
• Exchange - the router is describing its entire link state database by
sending Database Description packets to the neighbor.