User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 905
8.3.1.9. show ipv6 route summary
This command displays the summary of the routing table. Use all to display the count summary for all routes,
including best and non-best routes. Use the command without parameters to display the count summary for
only the best routes.
Format show ipv6 route summary [all]
Default None
Mode Privileged Exec
Display Message
OSPF External
Preference of OSPF external routes.
BGP External
Preference of eBGP routes.
BGP Internal
Preference of iBGP routes.
BGP Local
Preference of BGP local routes.
Fields
Definition
Connected Routes
Total number of connected routes in the routing table.
Static Routes
Total number of static routes in the routing table.
Kernel Routes
Total number of kernel routes in the routing table.
6to4 Routes
Total number of 6to4 routes in the routing table.
BGP Routes
Total number of routes installed by BGP protocol. The routes include external
routes, internal routes and local routes.
OSPF Routes
Total number of routes installed by OSPFv3 protocol. The routes include intra-
area routes, inter-area routes, external type-1 routes, and external type-2
routes.
Reject Routes
Total number of reject routes installed by all protocols.
Total Routes
Total number of routes in the routing table.
Best Routes
The number of best routes currently in the routing table. This number only
counts the best route to each destination.