User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 824
6.11.2.5. priority
This command sets the priority level of the device within a VRRPv3 group. The priority level controls which
device becomes the master virtual router.
To reset the priority level of the device to the default value, use the no form of this command.
Format priority <level>
no priority
Default 100
Mode VRRPv3 Config
6.11.2.6. timers advertise
This command configures the interval between successive advertisements by the master virtual router in
a VRRP group.
The advertisements being sent by the master virtual router communicate the advertisement interval, state, and
priority of the current master virtual router. The VRRP timers advertise command configures the time between
successive advertisement packets and the time before other routers declare the master router to be down.
VRRP backup routers learn timer values from the master router advertisements. The timers configured on the
master router always override any other timer settings that are used for calculating the master down time
interval on VRRP backup routers.
To restore the default value, use the no form of this command.
Format timers advertise <milliseconds>
no timers advertise
Default 1 (100 milliseconds)
Mode VRRPv3 Config
6.11.2.7. shutdown
This command disables the VRRP group configuration.
To enable and update the virtual router state after completing configuration.restore the default value, use the
no form of this command.
Fields
Definition
level
Priority of the device within the VRRP group. The range is from 1 to 254.
Fields
Definition
milliseconds
Time interval between successive advertisements by the master virtual router.
The unit of the interval is in 100 milliseconds. The valid range is 100 to 40000
milliseconds