User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 750
6.10.1.7. show ip bgp neighbors
This command displays information about Border Gateway Protocol (BGP) and TCP connections to neighbors. If
a VRF instance is specified, the routes information for the neighbors within that VRF instance are displayed.
Format show ip bgp [vrf vrf-name] neighbors [<ip-address> [advertised-routes | policy | received-routes |
rejected-routes | routes] | policy]
Default None
Mode Privileged Exec
User Exec
Display Messages
Next Hop
IP address of the next system that is used when forwarding a packet to the
destination network. An entry of 0.0.0.0 indicates that the router has some non-
BGP routes to this network.
Metric
The value of the interautonomous system metric. Value of the MED attribute, if
included.
LocPref
Local preference value as set with the set local-preference route-map
configuration command or received from the peer. The default value is 100.
Path
Autonomous system paths to the destination network. There can be one entry in
this field for each autonomous system in the path.
Fields
Definition
vrf-name
Display routes whithin a VRF instance.
ip-address
Displays information about the IPv4 neighbor. If this argument is omitted,
information about all neighbors is displayed.
Policy
Display inbound and outbound policies for all neighbors or the specified
neighbor.
Advertised-routes
Display routes advertised to a neighbor.
Received-routes
Display routes received from a neighbor.
Rejected-routes
Display routes rejected by inbound policy.
Routes
Display routes accepted by inbound policy.
Fields
Definition
Remote Address
The IP Address of the Peer's BGP interface.