User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 746
Display Message
6.10.1.4. show ip bgp community
This command display routes that belong to specified BGP communities. If a VRF instance is specified,
the routes belonging to the community within that VRF instance are displayed.
Format show ip bgp [vrf vrf-name] community [<community-number>] [exact-match] [no-advertise] [no-
export]
Default None
Mode Privileged Exec
User Exec
Display Message
Fields
Definition
Aggregation of routes with
different MED values is
allowed
The aggregate-different-meds is enabled.
Prefix/Len
Destination IP prefix and prefix length.
AS Set
Indicates whether an empty AS path is advertised with the aggregate address (N)
or an AS SET is advertised with the set of AS numbers for the paths contributing
to the aggregate (Y).
Summary Only
Indicates whether the individual networks are suppressed (Y) or advertised (N).
Active
Indicates whether the aggregate address is currently begin advertised.
Fields
Definition
vrf-name
Display routes belonging to communities whithin a VRF instance.
< community-number >
Valid value is a community number in the range from 1 to 4294967295, or AA:NN
(autonomous system-community number/2-byte number).
exact-match
Destination IP prefix and prefix length.
no-advertise
Display only routes that are not advertised to any peer.
no-export
Display only routes that are not exported outside of the local AS.
Fields
Definition
BGP table version
The BGP Table Version is the main number used. This number is the same as the
Generation ID of any BGP prefix for a specific address family and is used to track
changes to the BGP route table.