User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 695
Default None
Mode Privileged Exec
6.3.2.26. clear ip ospf configuration
Use this command to reset the OSPF configuration to factory defaults.
Format clear ip ospf configuration [vrf <vrf-name>]
Default None
Mode Privileged Exec
6.3.2.27. clear ip ospf counters
Use this command to reset global and interface statistics.
Format clear ip ospf counters [vrf <vrf-name>]
Default None
Mode Privileged Exec
6.3.2.28. clear ip ospf neighbor
Use this command to drop the adjacency with all OSPF neighbors. On each neighbor’s interface, send a one-way
hello. Adjacencies may then be re-established. To drop all adjacencies with a specific router ID, specify the
neighbor’s Router ID using the optional parameter [ipaddr].
Format clear ip ospf neighbor [[vrf <vrf-name>] | <ipaddr>]
Fields
Definition
<vrf-name>
The virtual rotuer on which the OSPF is disabled and re-enabled.
Fields
Definition
<vrf-name>
The virtual rotuer on which the OSPF is reset.
Fields
Definition
<vrf-name>
The virtual rotuer on which the statistics of OSPF is reset