User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 689
Format area <areaid> nssa no-redistribute
no area <areaid> nssa no-redistribute
Default None
Mode Router OSPF Config
6.3.2.10. area nssa no-summary
area nssa no-summary command configures the NSSA so that summary LSAs are not advertised into the NSSA.
no area nssa no-summary command disables nssa from the summary LSAs.
Format area <areaid> nssa no-summary
no area <areaid> nssa no-summary
Default None
Mode Router OSPF Config
6.3.2.11. area nssa translator-role
area nssa translator-role command configures the translator role of the NSSA. A value of always causes the
router to assume the role of the translator the instant it becomes a border router and a value of candidate
causes the router to participate in the translator election process when it attains border router status. no area
nssa translator-role command disables the nssa translator role from the specified area id.
Format area <areaid> nssa translator-role {always | candidate}
no area <areaid> nssa translator-role {always | candidate}
Default None
Mode Router OSPF Config
6.3.2.12. area nssa translator-stab-intv
area nssa translator-stab-intv command configures the translator <stabilityinterval> of the NSSA. The
<stabilityinterval> is the period of time that an elected translator continues to perform its duties after it
determines that its translator status has been deposed by another router. The no area nssa translator-stab-intv
command disables the nssa translator’s <stabilityinterval> from the specified area id. The <stabilityinterval>
range is fomr 0 to 3600.
Format area <areaid> nssa translator-stab-intv <stabilityinterval>
no area <areaid> nssa translator-stab-intv <stabilityinterval>
Default None