User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 681
If you specify an IP address for the neighbor router, the following fields display:
6.3.1.11. show ip ospf range
This command displays information about the area ranges for the specified <areaid>. The <areaid> identifies the
OSPF area whose ranges are being displayed.
Format show ip ospf range <areaid> [vrf <vrf-name>]
Default None
Dead Time
The amount of time, in seconds, to wait before the router assumes the neighbor
is unreachable.
Fields
Definition
Interface
Valid slot and port number separated by a forward slash.
Neighbor IP Address
The IP address of the neighbor router.
Interface Index
The interface ID of the neighbor router.
Area ID
The area ID of the OSPF area associated with the interface.
Options
An integer value that indicates the optional OSPF capabilities supported by the
neighbor. The neighbor's optional OSPF capabilities are also listed in its Hello
packets. This enables received Hello Packets to be rejected (i.e., neighbor
relationships will not even start to form) if there is a mismatch in certain crucial
OSPF capabilities.
Router Priority
The OSPF priority for the specified interface. The priority of an interface is a
priority integer from 0 to 255. A value of '0' indicates that the router is not eligible
to become the designated router on this network.
Dead Timer Due
The amount of time, in seconds, to wait before the router assumes the neighbor
is unreachable.
Up Time
Neighbor uptime; how long since the adjacency last reached the Full state.
State
The state of the neighboring routers.
Events
The number of times this neighbor relationship has changed state, or an error has
occurred.
Retransmitted LSAs
The number of LSAs retransmitted to this neighbor.
Retransmission Queue
Length
An integer representing the current length of the retransmission queue of the
specified neighbor router IDf the specified interface.