User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 674
Format show ip ospf [<areaid>] database [vrf <vrf-name>] [{asbr-summary | external | network | nssa-
external | opaque-area | opaque-as | opaque-link | router | summary}] [<lsid>] [{adv-router
[<ipaddr>] | self-originate}]
Default None
Mode Privileged EXEC
User EXEC
Display Message
The information below is only displayed if OSPF is enabled.
Fields
Definition
vrf-name
Specify the virtual router for which to display information
adv-router
Display the LSAs that are restricted by the advertising router. To specify a router,
enter the IP address of the router.
asbr-summary
Use asbr-summary to show the autonomous system boundary router (ASBR)
summary LSAs.
external
Use external to display the external LSAs.
network
Use network to display the network LSAs.
nssa-external
Use nssa-external to display NSSA external LSAs.
opaque-area
Use opaque-area to display area opaque LSAs.
opaque-as
Use opaque-as to display AS opaque LSAs.
opaque-link
Use opaque-link to display link opaque LSAs.
router
Use router to display router LSAs.
summary
Use summary to show the LSA database summary information.
lsid
Use <lsid> to specify the link state ID (LSID). The value of <lsid> can be an IP
address or an integer in the range of 0-4294967295.
adv-router
Use adv-router to show the LSAs that are restricted by the advertising router.
self-originate
Use self-originate to display the LSAs in that are self originated.
Fields
Definition
Links Id
A number that uniquely identifies an LSA that a router originates from all other
self originated LSAs of the same LS type.