User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 671
6.3.1.2. show ip ospf abr
This command displays the internal OSPF routing table entries to Area Border Routers (ABR). This command
takes no options.
Format show ip ospf abr [vrf <vrf-name>]
Default None
Mode Privileged EXEC
User EXEC
Display Message
Maximum Number of
Retransmit Entries
The maximum number of LSAs that can be waiting for acknowledgment at any
given time.
Retransmit Entries High
Water Mark
The highest number of LSAs that have been waiting for acknowledgment.
NSF Helper Support
Whether this router is configured to act as a graceful restart helpful neighbor.
Possible values are: Helper Support Always, Disabled, or Planned.
NSF Helper Strict LSA
Checking
As a graceful restart helpful neighbor, whether to terminate the helper
relationship if a topology change occurs during a neighbor's graceful restart.
Fields
Definition
Type
The type of the route to the destination. It can be either:
intra — Intra-area route
inter — Inter-area route
Router ID
Router ID of the destination.
Cost
Cost of using this route.
Area ID
The area ID of the area from which this route is learned.
Next Hop
Next hop toward the destination.
Next Hop Intf
The outgoing router interface to use when forwarding traffic to the next hop.