User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 655
Local: The number of local BGP routes.
OSPF Routes
Total number of routes installed by OSPF protocol:
Intra Area Routes: Total number of Intra Area routes installed by OSPF protocol.
Inter Area Routes: Total number of Inter Area routes installed by OSPF protocol.
External Type-1 Routes: Total number of External Type-1 routes installed by OSPF
protocol.
External Type-2 Routes: Total number of External Type-2 routes installed by OSPF
protocol.
Reject Routes
Total number of reject routes installed by all protocols.
Total Routes
Total number of routes in the routing table.
Best Routes (High)
The number of best routes currently in the routing table. This number only counts
the best route to each destination. The value in parentheses indicates the highest
count of unique best routes after counters were last cleared.
Alternate Routes
The number of alternate routes currently in the routing table. An alternate route
is a route that was not selected as the best route to its destination.
Leaked Routes
The number of leaked routes currently in the routing table. This leaked routes
are the routes leaked into RTO from other VRF.
RFC5549 Routes - IPv4 with
IPv6 nexthop
The number of RFC5549 routes currently in the routing table. This RFC5549
routes are advertising BGP IPv4 NLRI with an IPv6 Next Hop.
Route Adds
The number of routes that have been added to the routing table.
Route Modifies
The number of routes that have been changed after they were initially added to
the routing table.
Route Deletes
The number of routes that have been deleted from the routing table.
Unresolved Route Adds
The number of route adds that failed because none of the route’s next hop were
on a local subnet. Note that static routes can fail to be added to the routing table
at startup because ther routing interfaces are not yet up. This counter gets
incremented in this case. The static routes are added to the routing table when
the routing interfaces come up.
Invalid Route Adds
The number of routes that failed to be added to the routing table because the
route was invalid. A log message is written for each of these failures.
Failed Route Adds
The number of routes that failed to be added to the routing table because of a
resource limitation in the routing table.
Failed Kernel Route Adds
The number of kernel routes that failed to be added to the routing table
because of a kernel error or a table full condition.