User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 575
5.24. iSCSI Optimization Commands
This section describes commands you use to monitor iSCSI sessions and prioritize iSCSI packets. iSCSI
Optimzation provides a means of giving traffic between iSCSI initiator and target systems special Quality of
Service (QoS) treatment. This is accomplished by monitoring traffic to detect packets used by iSCSI stations to
establish iSCSI sessions and connections. Data from these exchanges is used to create classification rules that
assign the traffic between the stations to a configured traffic class. Packets in the flow are queued and
scheduled for egress on the destination port based on these rules.
5.24.1. show iscsi
Use this command to display the iSCSI settings.
Format show iscsi
Mode Privileged EXEC
Display Message
5.24.2. show iscsi sessions
Use this command to display the iSCSI sessions.
Format show iscsi sessions [detailed]
Mode Privileged EXEC
Fields
Definition
iSCSI enabled/disabled
Displays if iSCSI session monitor is enabled or disabled.
iSCSI Egress queue
Indicates the egress queue for the iSCSI session.
Session aging time
The number of minutes a session must be inactive prior to its removal. Range:
1-43,200
Maximum number of
sessions
Indicates the maximum number of the iSCSI sessions. The value is 192.
TCP Port
iSCSI target TCP port.
Target IP Address
iSCSI target IP address.
Name
iSCSI target Name