User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 529
Format police-single-rate {<1-4294967295> <1-128> <1-128> conform-action {drop | set-cos-as-sec-cos | set-
cos-transmit <0-7> | set-dscp-transmit <value> | set-prec-transmit <0-7> | transmit} exceed-action
{ drop | set-cos-as-sec-cos | set-cos-transmit <0-7> | set-dscp-transmit <value> | set-prec-transmit
<0-7> | transmit} [violate-action { drop | set-cos-as-sec-cos | set-cos-transmit <0-7> | set-dscp-
transmit <value> | set-prec-transmit <0-7> | transmit }]}
Default None
Mode Policy-Class-Map Config
5.20.3.14. police-two-rate
This command is the two-rate form of the police command and is used to establish the traffic policing style for
the specified class. For each outcome, the only possible actions are drop, set-cos-as-sec-cos, set-cos-transmit,
set-sec-cos-transmit, set-dscp-transmit, set-prec-transmit, or transmit. In this two-rate form of the police
command, the conform action defaults to send, the exceed action defaults to drop, and the violate action
defaults to drop. These actions can be set with this command once the style has been configured.
Format police-two-rate {<1-4294967295> <1-128> <1-4294967295> <1-128> conform-action {drop | set-cos-
as-sec-cos | set-cos-transmit <0-7> | set-dscp-transmit <value> | set-prec-transmit <0-7> | transmit}
exceed-action { drop | set-cos-as-sec-cos | set-cos-transmit <0-7> | set-dscp-transmit <value> | set-
prec-transmit <0-7> | transmit } [violate-action { drop | set-cos-as-sec-cos | set-cos-transmit <0-7> |
set-dscp-transmit <value> | set-prec-transmit <0-7> | transmit}]}
Parameter
Description
<conform-action & violate-
action & exceed-action>
The conforming data rate is specified in kilobits-per-second (Kbps) and is an
integer from 1 to 4294967295. The conforming burst size is specified in
kilobytes (KB) and is an integer from 1 to 128. For each outcome, the only
possible actions are drop, set-cos-as-sec-cos , set-dscp-transmit, set-prec-
transmit, or set-cos-transmit. In this simple form of the police command, the
conform action defaults to transmit and the violate action defaults to drop.
These actions can be set with this command once the style has been
configured. Beside, the set-cos-transmit is to combine only with drop between
the conform-action and the violate-action.
<set-cos-transmit>
Priority value is required and is specified as an integer from 0-7.
<set-dscp-transmit>
Required and specified as either an integer from 0 to 63, or symbolically
through one of the following keywords: af11, af12, af13, af21, af22, af23,
af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.
<set-prec-transmit>
IP Precedence value is required and is specified as an integer from 0-7
Parameter
Description
<conform-action & violate-
action & exceed-action>
The conforming data rate is specified in kilobits-per-second (Kbps) and is an
integer from 1 to 4294967295. The conforming burst size is specified in
kilobytes (KB) and is an integer from 1 to 128. For each outcome, the only
possible actions are drop, set-cos-as-sec-cos , set-dscp-transmit, set-prec-
transmit, or set-cos-transmit. In this simple form of the police command, the