User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 528
For set-dscp-transmit, a <dscpval> value is required and is specified as either an integer from 0 to 63, or
symbolically through one of the following keywords: af11, af12, af13, af21, af22, af23,af31, af32, af33, af41, af42,
af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.
For set-prec-transmit, an IP Precedence value is required and is specified as an integer from 0-7.
For set-cos-transmit an 802.1p priority value is required and is specified as an integer from 0-7.
Format police-simple {<1-4294967295> <1-128> conform-action {drop | set-cos-as-sec-cos | set-cos-transmit
<0-7> | set-dscp-transmit <value> | set-prec-transmit <0-7> | transmit} [violate-action { drop | set-
cos-as-sec-cos | set-cos-transmit <0-7> | set-dscp-transmit <value> | set-prec-transmit <0-7> |
transmit }]}
The simple form of the police command uses a single data rate and burst size, resulting in two outcomes:
Default None
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark (all forms)
5.20.3.13. police-single-rate
This command is the single-rate form of the police command and is used to establish the traffic policing style for
the specified class. For each outcome, the only possible actions are drop, set-cos-as-sec-cos, set-cos-transmit,
set-sec-cos-transmit, set-dscp-transmit, set-prec-transmit, or transmit. In this single-rate form of the police
command, the conform action defaults to send, the exceed action defaults to drop, and the violate action
defaults to drop. These actions can be set with this command once the style has been configured.
Parameter
Description
<conform-action & violate-
action>
The conforming data rate is specified in kilobits-per-second (Kbps) and is an
integer from 1 to 4294967295. The conforming burst size is specified in
kilobytes (KB) and is an integer from 1 to 128. For each outcome, the only
possible actions are drop, set-dscp-transmit, set-prec-transmit, or set-cos-
transmit. In this simple form of the police command, the conform action
defaults to transmit and the violate action defaults to drop. These actions can
be set with this command once the style has been configured. Beside, the set-
cos-transmit is to combine only with drop between the conform-action and
the violate-action.
<set-cos-transmit>
Priority value is required and is specified as an integer from 0-7.
<set-dscp-transmit>
Required and specified as either an integer from 0 to 63, or symbolically
through one of the following keywords: af11, af12, af13, af21, af22, af23,
af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.
<set-prec-transmit>
IP Precedence value is required and is specified as an integer from 0-7