User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 488
Example:
(M4500-32C) #show ip dhcp snooping
DHCP snooping is Enabled
DHCP snooping source MAC verification is enabled
DHCP snooping is enabled on the following VLANs:
1
Interface Trusted Log Invalid Pkts
----------- ---------- ----------------
0/1 Yes No
0/2 No No
0/3 No No
0/4 No No
0/5 No No
0/6 No No
0/7 No No
0/8 No No
0/9 No No
0/10 No No
0/11 No No
0/12 No No
0/13 No No
0/14 No No
0/15 No No
(M4500-32C) #
5.17.2. show ip dhcp snooping per interface
This command displays the DHCP snooping detail configurations for all interfaces or for a specific interface.
Format show ip dhcp snooping interfaces [<slot/port> | port-channel <portchannel-id>]
Default None
Mode Privileged Exec
Example:
(M4500-32C) #show ip dhcp snooping interfaces
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
---------- ------------- ------------- ---------------
0/1 Yes None N/A
0/2 No None N/A
0/3 No None N/A
0/4 No None N/A
0/5 No None N/A
0/6 No None N/A
0/7 No None N/A
0/8 No None N/A
0/9 No None N/A
0/10 No None N/A