User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 433
Example: The following shows example CLI display output for the command.
(M4500-32C) #show port-security
Port Security Administration Mode: Disabled
(M4500-32C) #show port-security 0/1
Admin Dynamic Static Violation Violation Sticky
Intf Mode Limit Limit Trap Mode Shutdown Mode
------ ----------- -------- -------- ------------- ------------ --------
0/1 Disabled 600 20 Disabled Disabled Disabled
5.14.2. show port-security dynamic
This command displays the dynamically locked MAC address for the port.
Format show port-security dynamic {<slot/port> | port-channel <portchannel-id>}
Mode Privileged EXEC
User EXEC
Display Message
5.14.3. show port-security static
This command displays the statically locked MAC address for port.
Format show port-security static {<slot/port> | port-channel <portchannel-id>}
Mode Privileged EXEC
User EXEC
Parameter
Definition
MAC AddressDynamically
learned MAC Address
MAC Address of dynamically locked MAC
VLAN ID
VLAN ID on which the MAC address was learnt.
Number of Dynamic MAC
addresses learned
The number of dynamic MAC addresses learned