User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 413
Number of CoA ACK Responses Sent............... 0
Number of CoA NAK Responses Sent............... 0
Number of CoA Requests Ignored................. 0
Number of CoA Missing/Unsupported Attribute R.. 0
Number of CoA Session Context Not Found Reque.. 0
Number of CoA Invalid Attribute Value Request.. 0
Number of Administratively Prohibited Request.. 0
5.12.4. show radius statistics
This command is used to display the statistics for RADIUS or configured server. To show the configured RADIUS
server statistic, the IP Address specified must match that of a previously configured RADIUS server. On
execution, the following fields are displayed.
Format show radius statistics {<ipaddress | ipv6-address|hostname> | name <servername>}
Mode Privileged EXEC
Display Message
Parameter
Definition
RADIUS Server Name
The Name of the authenticating server.
Server Host Address
The IP address or host name of the authenticating server.
Round Trip Time
The time interval, in hundredths of a second, between the most recent Access-
Reply, Access - Challenge and the Access-Request that matched it from the
RADIUS authentication server.
Access Requests
The number of RADIUS Access-Request packets sent to this server. This number
does not include retransmissions.
Access Retransmissions
The number of RADIUS Access-Request packets retransmitted to this RADIUS
authentication server.
Access Accepts
The number of RADIUS Access-Accept packets, including both valid and invalid
packets, which were received from this server.
Access Rejects
The number of RADIUS Access-Reject packets, including both valid and invalid
packets, which were received from this server.
Access Challenges
The number of RADIUS Access-Challenge packets, including both valid and
invalid packets, which were received from this server.