User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 400
(M4500-32C) #show accounting methods
AcctType MethodName MethodType Method1 Method2
-------- -------------- ---------- ------- -------
Exec dfltExecList none tacacs
Commands dfltCmdList none tacacs
DOT1X dfltDot1xList start-stop radius
Line EXEC Method List Command Method List
------------ ---------------- -------------------
Console dfltExecList dfltCmdList
Telnet dfltExecList dfltCmdList
SSH dfltExecList dfltCmdList
5.11.3. aaa authentication login
This command creates an authentication login list. The <listname> is up to 12 alphanumeric characters and is
not case sensitive. Up to 5 authentication login lists can be configured on the switch.
If the authentication login list does not exist, a new authentication login list is first created and then the
authentication methods are set in the authentication login list. The possible method values are enable, line,
local, none, radius and tacacs.
To authenticate a user, the authentication methods in the user’s login will be attempted in order until an
authentication attempt succeeds or fails.
Note: The default login list included with the default configuration cannot be changed
Format aaa authentication login {<listname> | default | network} method1 [method2…]
Parameter
Definition
default
Uses the listed authentication methods that follow this argument as the default
list of methods when a user logs in.
listname
Character string of up to 15 characters used to name the list of authentication
methods activated when a user logs in.
method1…
At least one from the following: