User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 372
Passwords Configuration
---------------------------------
Minimum Password Length........................ 8
Password Aging (days).......................... 0
Password History............................... 0
Lockout Attempts............................... 0
Password Strength Check........................ Enable
Minimum Password Uppercase Letters............. 0
Minimum Password Lowercase Letters............. 0
Minimum Password Numeric Characters............ 1
Minimum Password Special Characters............ 1
Maximum Password Repeated Characters........... 0
Maximum Password Consecutive Characters........ 0
Minimum Password Character Classes............. 3
Password Exclude Keywords...................... <none>
5.9.5. show passwords result
Use this command to display the last password set result information.
Format show passwords result
Default None
Mode Privileged Exec
Display Message
Parameter
Definition
Last User Whose Password Is
Set
The local user account’s user name.
Password Strength Check
The user’s privilege level. The range of privilege level is 1 and 15. Access mode
for privilege level 15 is read/write, the others is read-only.
Last Password Set Result
Indicates number of days, since the password was configured, until the password
expires.