User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 371
5.9.4. show passwords configuration
Use this command to display the configured password management settings.
Format show passwords configuration
Default None
Mode Privileged Exec
Display Message
Example: The following shows examples of the CLI display output for the commands.
(M4500-32C) (Config)#show passwords configuration
Parameter
Definition
Minimum Password Length
Minimum number of characters required when changing passwords.
Password Aging
Length in days that a password is valid.
Password History
Number of passwords to store for reuse prevention.
Lockout Attempts
Number of failed password login attempts before lockout.
Password Strength Check
The user to configure passwords that comply with the strong password
configuration.
Minimum Password
Uppercase Letters
Minimum number of uppercase characters required when changing passwords.
Minimum Password
Lowercase Letters
Minimum number of lowercase characters required when changing passwords.
Minimum Password Numeric
Characters
Minimum number of numeric characters required when changing passwords.
Minimum Password Special
Characters
Minimum number of special characters required when changing passwords.
Maximum Password
Repeated Characters
Maximum number of characters cannot repeated when changing passwords.
Maximum Password
Consecutive Characters
Maximum number of characters cannot consecutive when changing passwords.
Minimum Password
Character Classes
Valid range for user passwords.
Password Exclude Keywords
The password to be configured should not contain the keyword mentioned in this
field.