User Manual
Table Of Contents
- 1. Introduction
- 2. Quick Startup
- 3. Console and Telnet Administration Interface
- 4. Command Line Interface Structure and Mode-based CLI
- 5. Switching Commands
- 5.1. System Information and Statistics Commands
- 5.1.1. show arp
- 5.1.2. show calendar
- 5.1.3. show process cpu
- 5.1.4. show process cpu threshold
- 5.1.5. show eventlog
- 5.1.6. show running-config
- 5.1.7. show sysinfo
- 5.1.8. POST Diagnostic Commands
- 5.1.9. show system
- 5.1.10. show tech-support
- 5.1.11. show hardware
- 5.1.12. show version
- 5.1.13. show logingsessin
- 5.1.14. show command filter
- 5.1.15. show transceiver device
- 5.1.16. show transceiver interface
- 5.1.17. show process memory
- 5.1.18. show process app-list
- 5.1.19. show process app-resource-list
- 5.1.20. show process proc-list
- 5.1.21. show environment
- 5.1.22. show configuration files
- 5.1.23. process cpu threshold
- 5.1.24. memory free low-watermark processor
- 5.1.25. show supported cardtype
- 5.1.26. show supported cardtype
- 5.1.27. pager
- 5.1.28. show pager
- 5.2. Device Configuration Commands
- 5.2.1. Interface commands
- 5.2.1.1. show interface status
- 5.2.1.1.1. show interface status
- 5.2.1.1.2. show interface status
- 5.2.1.1.3. show interface status err-disabled
- 5.2.1.1.4. show interface status loopback <0-63>
- 5.2.1.1.5. show interface status port-channel <1-64>
- 5.2.1.1.6. show interface status tunnel <0-7>
- 5.2.1.1.7. show interface status vlan <1-4093>
- 5.2.1.2. show interface counters
- 5.2.1.3. show interface dampening
- 5.2.1.4. show interface loopback
- 5.2.1.5. show interface port-channel
- 5.2.1.6. show interface port-mode
- 5.2.1.7. show interface priority flow control
- 5.2.1.8. show interface switch
- 5.2.1.9. show interface switchport
- 5.2.1.10. show interface tunnel
- 5.2.1.11. show interface description
- 5.2.1.12. show interface fec
- 5.2.1.13. show interface advertise
- 5.2.1.14. Interface configuraton commands
- 5.2.1.15. show port status all
- 5.2.1.16. Show flowcontrol
- 5.2.1.1. show interface status
- 5.2.2. Show BMC Commands
- 5.2.3. L2 MAC Address and Multicast Forwarding Database Tables
- 5.2.3.1. show mac-addr-table
- 5.2.3.2. show mac-addr-table count
- 5.2.3.3. show mac-addr-table interface
- 5.2.3.4. show mac-address-table igmpsnooping
- 5.2.3.5. show mac-address-table multicast
- 5.2.3.6. show mac-address-table status
- 5.2.3.7. show mac-addr-table agetime
- 5.2.3.8. mac-addr-table aging-time
- 5.2.3.9. no mac-addr-table aging-time
- 5.2.3.10. clear mac-addr-table dynamic
- 5.2.4. VLAN Commands
- 5.2.4.1. vlan database
- 5.2.4.2. vlan
- 5.2.4.3. no vlan
- 5.2.4.4. vlan makestatic
- 5.2.4.5. vlan name
- 5.2.4.6. no vlan name
- 5.2.4.7. switchport acceptable-frame-types
- 5.2.4.8. no switchport acceptable-frame-types
- 5.2.4.9. switchport acceptbale-frame-type all
- 5.2.4.10. no switchport acceptable-frame-types all
- 5.2.4.11. switchport ingress-filtering
- 5.2.4.12. no switchport ingress-filtering
- 5.2.4.13. switchport ingress-filtering all
- 5.2.4.14. no switchport ingress-filtering all
- 5.2.4.15. switchport native vlan
- 5.2.4.16. no switchport native vlan
- 5.2.4.17. switchport native vlan all
- 5.2.4.18. no switchport native vlan all
- 5.2.4.19. switchport allowed vlan
- 5.2.4.20. switchport allowed vlan all
- 5.2.4.21. switchport tagging
- 5.2.4.22. no switchport tagging
- 5.2.4.23. switchport tagging all
- 5.2.4.24. no switchport tagging all
- 5.2.4.25. show vlan
- 5.2.4.26. show vlan id
- 5.2.4.27. show vlan internal usage
- 5.2.4.28. show interface switchport
- 5.2.4.29. show vlan private-vlan
- 5.2.4.30. show vlan remote-span
- 5.2.5. Private VLAN Commands
- 5.2.6. Switch Ports
- 5.2.6.1. switchport mode
- 5.2.6.2. no switchport mode
- 5.2.6.3. switchport trunk allowed vlan
- 5.2.6.4. no switchport trunk allowed vlan
- 5.2.6.5. switchport trunk native vlan
- 5.2.6.6. no switchport trunk native vlan
- 5.2.6.7. switchport access vlan
- 5.2.6.8. no switchport access vlan
- 5.2.6.9. show interfaces switchport
- 5.2.7. Double VLAN Commands
- 5.2.8. IGMP snooping commands
- 5.2.8.1. ip igmp snooping
- 5.2.8.2. no ip igmp snooping
- 5.2.8.3. clear igmp snooping
- 5.2.8.4. ip igmp snooping interfacemode
- 5.2.8.5. no ip igmp snooping interfacemode
- 5.2.8.6. ip igmp snooping interfacemode all
- 5.2.8.7. no ip igmp snooping interfacemode all
- 5.2.8.8. ip igmp snooping fast-leave
- 5.2.8.9. no ip igmp snooping fast-leave
- 5.2.8.10. ip igmp snooping groupmembershipinterval
- 5.2.8.11. no ip igmp snooping groupmembershipinterval
- 5.2.8.12. ip igmp snooping mcrtrexpiretime
- 5.2.8.13. no ip igmp snooping mcrtrexpiretime
- 5.2.8.14. ip igmp snooping mrouter
- 5.2.8.15. no ip igmp snooping mrouter
- 5.2.8.16. set igmp
- 5.2.8.17. no set igmp
- 5.2.8.18. set igmp fast-leave
- 5.2.8.19. no set igmp fast-leave
- 5.2.8.20. set igmp groupmembership-interval
- 5.2.8.21. no set igmp groupmembership-interval
- 5.2.8.22. set igmp maxresponse
- 5.2.8.23. no set igmp maxresponse
- 5.2.8.24. set igmp mcrtrexpiretime
- 5.2.8.25. no set igmp mcrtrexpiretime
- 5.2.8.26. set igmp report-suppression
- 5.2.8.27. no set igmp report-suppression
- 5.2.8.28. set snoop-vlan-block
- 5.2.8.29. no set snoop-vlan-block
- 5.2.8.30. ip igmp snooping static
- 5.2.8.31. no ip igmp snooping static
- 5.2.8.32. ip igmp snooping router-alert-check
- 5.2.8.33. no ip igmp snooping router-alert-check
- 5.2.8.34. show ip igmp snooping
- 5.2.8.35. show ip igmp snooping mrouter interface
- 5.2.8.36. show ip igmp snooping mrouter vlan
- 5.2.8.37. show ip igmp snooping static
- 5.2.8.38. show mac-address-table igmpsnooping
- 5.2.8.39. show ip igmp snooping ssm entries
- 5.2.8.40. show ip igmp snooping ssm groups
- 5.2.8.41. show ip igmp snooping ssm stats
- 5.2.8.42. ip igmp snooping maxresponse
- 5.2.8.43. no ip igmp snooping maxresponse
- 5.2.9. IGMP snooping querier commands
- 5.2.9.1. ip igmp snooping querier
- 5.2.9.2. no ip igmp snooping querier
- 5.2.9.3. ip igmp snooping querier address
- 5.2.9.4. no ip igmp snooping querier address
- 5.2.9.5. ip igmp snooping querier query-interval
- 5.2.9.6. no ip igmp snooping querier query-interval
- 5.2.9.7. ip igmp snooping querier querier-expiry-interval
- 5.2.9.8. no ip igmp snooping querier querier-expiry-interval
- 5.2.9.9. ip igmp snooping querier version
- 5.2.9.10. no ip igmp snooping querier version
- 5.2.9.11. ip igmp snooping querier vlan
- 5.2.9.12. no ip igmp snooping querier vlan
- 5.2.9.13. ip igmp snooping querier vlan address
- 5.2.9.14. no ip igmp snooping querier vlan address
- 5.2.9.15. ip igmp snooping querier vlan election participate
- 5.2.9.16. no ip igmp snooping querier vlan election participate
- 5.2.9.17. show ip igmp snooping querier
- 5.2.9.18. show ip igmp snooping querier vlan
- 5.2.9.19. show ip igmp snooping querier detail
- 5.2.10. MLD Snooping Commands
- 5.2.10.1. show ipv6 mld snooping
- 5.2.10.2. show ipv6 mld snooping mrouter interface
- 5.2.10.3. show ipv6 mld snooping mrouter vlan
- 5.2.10.4. show ipv6 mld snooping static
- 5.2.10.5. show mac-address-table mldsnooping
- 5.2.10.6. show ipv6 mld snooping ssm entries
- 5.2.10.7. show ipv6 mld snooping ssm groups
- 5.2.10.8. show ipv6 mld snooping ssm stats
- 5.2.10.9. ipv6 mld snooping
- 5.2.10.10. no ipv6 mld snooping
- 5.2.10.11. clear mld snooping
- 5.2.10.12. ipv6 mld snooping interfacemode
- 5.2.10.13. no ipv6 mld snooping interfacemode
- 5.2.10.14. ipv6 mld snooping interfacemode all
- 5.2.10.15. no ipv6 mld snooping interfacemode all
- 5.2.10.16. ipv6 mld snooping fast-leave
- 5.2.10.17. no ipv6 mld snooping fast-leave
- 5.2.10.18. ipv6 mld snooping groupmembershipinterval
- 5.2.10.19. no ipv6 mld snooping groupmembershipinterval
- 5.2.10.20. ipv6 mld snooping mcrtrexpiretime
- 5.2.10.21. no ipv6 mld snooping mcrtrexpiretime
- 5.2.10.22. ipv6 mld snooping mrouter
- 5.2.10.23. no ipv6 mld snooping mrouter
- 5.2.10.24. ipv6 mld snooping static
- 5.2.10.25. no ipv6 mld snooping static
- 5.2.10.26. set mld
- 5.2.10.27. no set mld
- 5.2.10.28. set mld fast-leave
- 5.2.10.29. no set mld fast-leave
- 5.2.10.30. set mld groupmembership-interval
- 5.2.10.31. no set mld groupmembership-interval
- 5.2.10.32. set mld maxresponse
- 5.2.10.33. no set mld maxresponse
- 5.2.10.34. set mld mcrtrexpiretime
- 5.2.10.35. no set mld mcrtrexpiretime
- 5.2.11. MLD Snooping Querier Commands
- 5.2.11.1. show ipv6 mld snooing querier
- 5.2.11.2. show ipv6 mld snooping querier vlan
- 5.2.11.3. show ipv6 mld snooping querier detail
- 5.2.11.4. ipv6 mld snooping querier
- 5.2.11.5. no ipv6 mld snooping querier
- 5.2.11.6. ipv6 mld snooping querier address
- 5.2.11.7. no ipv6 mld snooping querier address
- 5.2.11.8. ipv6 mld snooping querier query-interval
- 5.2.11.9. no ipv6 mld snooping querier querier-interval
- 5.2.11.10. ipv6 mld snooping querier querier-expiry-interval
- 5.2.11.11. no ipv6 mld snooping querier querier-expiry-interval
- 5.2.11.12. ipv6 mld snooping querier vlan
- 5.2.11.13. no ipv6 mld snooping querier vlan
- 5.2.11.14. ipv6 mld snooping querier vlan address
- 5.2.11.15. no ipv6 mld snooping querier vlan address
- 5.2.11.16. ipv6 mld snooping querier vlan election participate
- 5.2.11.17. no ipv6 mld snooping querier vlan election participate
- 5.2.12. Port-Channel/LAG (802.3ad) Commands
- 5.2.12.1. show interface port-channel brief
- 5.2.12.2. show interface port-channel
- 5.2.12.3. show interface port-channel system priority
- 5.2.12.4. show lacp actor
- 5.2.12.5. show lacp interface
- 5.2.12.6. interface port-channel
- 5.2.12.7. staticcapability
- 5.2.12.8. no staticcapability
- 5.2.12.9. port-channel linktrap
- 5.2.12.10. no port-channel linktrap
- 5.2.12.11. port-channel load-balance
- 5.2.12.12. no port-channel load-balance
- 5.2.12.13. load-balance
- 5.2.12.14. no load-balance
- 5.2.12.15. port-channel system priority
- 5.2.12.16. no port-channel system priorty
- 5.2.12.17. lacp
- 5.2.12.18. no lacp
- 5.2.12.19. lacp all
- 5.2.12.20. no lacp
- 5.2.12.21. lacp admin key
- 5.2.12.22. no lacp admin key
- 5.2.12.23. lacp actor admin key
- 5.2.12.24. no lacp actor admin key
- 5.2.12.25. lacp actor admin state
- 5.2.12.26. no lacp actor admin state
- 5.2.12.27. lacp actor port priority
- 5.2.12.28. no lacp actor port priority
- 5.2.12.29. min-links
- 5.2.12.30. no min-links
- 5.2.12.31. lacp fallback
- 5.2.12.32. no lacp fallback
- 5.2.12.33. lacp fallback timeout
- 5.2.12.34. no lacp fallback timeout
- 5.2.12.35. channel-group
- 5.2.12.36. no channel-group
- 5.2.12.37. delete-channel-group
- 5.2.12.38. port lacpmode enable all
- 5.2.12.39. port lacptimeout
- 5.2.13. Storm Control
- 5.2.13.1. show storm-control
- 5.2.13.2. storm-control Configuration
- 5.2.13.3. storm-control broadcast
- 5.2.13.4. no storm-control broadcast
- 5.2.13.5. storm-control broadcast action
- 5.2.13.6. no storm-control broadcast action
- 5.2.13.7. storm-control broadcast rate
- 5.2.13.8. no storm-control broadcast rate
- 5.2.13.9. storm-control broadcast level
- 5.2.13.10. no storm-control broadcast level
- 5.2.13.11. storm-control multicast
- 5.2.13.12. no storm-control multicast
- 5.2.13.13. storm-control multicast action
- 5.2.13.14. no storm-control multicast action
- 5.2.13.15. storm-control multicast level
- 5.2.13.16. no storm-control multicast level
- 5.2.13.17. storm-control multicast rate
- 5.2.13.18. no storm-control multicast rate
- 5.2.13.19. storm-control unicast
- 5.2.13.20. no storm-control unicast
- 5.2.13.21. storm-control unicast action
- 5.2.13.22. no storm-control unicast action
- 5.2.13.23. storm-control unicast level
- 5.2.13.24. no storm-control unicast level
- 5.2.13.25. storm-control unicast rate
- 5.2.13.26. no storm-control unicast rate
- 5.2.14. Port Mirror Commands
- 5.2.14.1. show port-mirror session
- 5.2.14.2. port-monitor session source
- 5.2.14.3. no port-monitor session source
- 5.2.14.4. port-monitor session destination
- 5.2.14.5. no port-monitor session destination
- 5.2.14.6. port-monitor session filter
- 5.2.14.7. no port-monitor session filter
- 5.2.14.8. port-monitor session mode
- 5.2.14.9. no port-monitor session mode
- 5.2.14.10. no port-monitor session
- 5.2.14.11. no port-monitor
- 5.2.15. Link State
- 5.2.16. Port-backup Commands
- 5.2.16.1. show port-backup
- 5.2.16.2. port-backup
- 5.2.16.3. no port-backup
- 5.2.16.4. port-backup group
- 5.2.16.5. no port-backup group
- 5.2.16.6. port-backup group active
- 5.2.16.7. no port-backup group active
- 5.2.16.8. port-backup group backup
- 5.2.16.9. no port-backup group backup
- 5.2.16.10. port-backup group enable
- 5.2.16.11. port-backup group mac-move-update
- 5.2.16.12. no port-backup group mac-move-update
- 5.2.16.13. port-backup group failback-time
- 5.2.16.14. no port-backup group failback-time
- 5.2.1. Interface commands
- 5.3. Provisioning (IEEE 802.1p) Commands
- 5.4. Management Commands
- 5.4.1. Network Commands
- 5.4.1.1. show ip interface
- 5.4.1.2. show ip filter
- 5.4.1.3. mtu
- 5.4.1.4. no mtu
- 5.4.1.5. interface vlan
- 5.4.1.6. ip address
- 5.4.1.7. no ip addess
- 5.4.1.8. ip default-gateway
- 5.4.1.9. ip address dhcp
- 5.4.1.10. no ip address dhcp
- 5.4.1.11. ip filter
- 5.4.1.12. no ip filter
- 5.4.1.13. ip filter
{ipv4|ipv6} [ ] - 5.4.1.14. no ip filter
- 5.4.2. Serial Interface Commands
- 5.4.3. Telnet Session Commands
- 5.4.3.1. telnet
- 5.4.3.2. show line vty
- 5.4.3.3. line vty
- 5.4.3.4. exec-timeout
- 5.4.3.5. no exec-time out
- 5.4.3.6. password-threshold
- 5.4.3.7. no password-threshold
- 5.4.3.8. maxsessions
- 5.4.3.9. no maxsessions
- 5.4.3.10. server enable
- 5.4.3.11. no server enable
- 5.4.3.12. sessions
- 5.4.3.13. no sessions
- 5.4.3.14. telnet sessions
- 5.4.3.15. no telnet sessions
- 5.4.3.16. telnet maxsessions
- 5.4.3.17. no telnet maxsessions
- 5.4.3.18. telnet exec-timeout
- 5.4.3.19. no telnet exec-timeout
- 5.4.3.20. show telnet
- 5.4.4. SNMP Server Commands
- 5.4.4.1. show snmp
- 5.4.4.2. snmp-server sysname
- 5.4.4.3. snmp-server location
- 5.4.4.4. snmp-server contact
- 5.4.4.5. snmp-server community
- 5.4.4.6. no snmp-server community
- 5.4.4.7. snmp-server community-group
- 5.4.4.8. no snmp-server community-group
- 5.4.4.9. show snmp engineid
- 5.4.4.10. snmp-server engineid
- 5.4.4.11. no snmp-server engineid
- 5.4.4.12. show snmp filters
- 5.4.4.13. snmp-server filter
- 5.4.4.14. no snmp-server filter
[ ] - 5.4.4.15. show snmp user
- 5.4.4.16. snmp-server user
- 5.4.4.17. no snmp-server user
- 5.4.4.18. show snmp group
- 5.4.4.19. snmp-server group
- 5.4.4.20. no snmp-server group
- 5.4.4.21. show snmp views
- 5.4.4.22. snmp-server view
- 5.4.4.23. no snmp-server view
- 5.4.5. SNMP Trap Commands
- 5.4.5.1. snmp-server host
traps - 5.4.5.2. no snmp-server host
- 5.4.5.3. show trapflags
- 5.4.5.4. snmp trap link-status all
- 5.4.5.5. no snmp trap link-status all
- 5.4.5.6. snmp-server enable traps acl-trapflags
- 5.4.5.7. no snmp-server enable traps acl-trapflags
- 5.4.5.8. snmp-server enable traps authentication
- 5.4.5.9. no snmp-server enable traps authentication
- 5.4.5.10. snmp-server enable traps bgp state-changes limited
- 5.4.5.11. no snmp-server enable traps bgp state-changes limited
- 5.4.5.12. snmp-server enable traps fan
- 5.4.5.13. no snmp-server enable traps fan
- 5.4.5.14. snmp-server enable traps linkmode
- 5.4.5.15. no snmp-server enable traps linkmode
- 5.4.5.16. snmp-server enable traps multiusers
- 5.4.5.17. snmp-server enable traps ospf
- 5.4.5.18. no snmp-server enable traps ospf
- 5.4.5.19. snmp-server enable traps ospfv3
- 5.4.5.20. no snmp-server enable traps ospfv3
- 5.4.5.21. snmp-server enable traps pim
- 5.4.5.22. no snmp-server enable traps pim
- 5.4.5.23. snmp-server enable traps powersupply
- 5.4.5.24. no snmp-server enable traps powersupply
- 5.4.5.25. snmp-server enable traps stpmode
- 5.4.5.26. no snmp-server enable traps stpmode
- 5.4.5.27. snmp-server enable traps temperature
- 5.4.5.28. no snmp-server enable traps temperature
- 5.4.5.29. snmp-server enable traps transceiver
- 5.4.5.30. no snmp-server enable traps transceiver
- 5.4.5.31. snmp-server enable traps violation
- 5.4.5.32. no snmp-server enable traps violation
- 5.4.5.33. show snmp source-interface
- 5.4.5.34. snmptrap source-interface
- 5.4.5.35. no snmptrap source-interface
- 5.4.5.36. snmp trap link-status
- 5.4.5.37. no snmp trap link-status
- 5.4.5.1. snmp-server host
- 5.4.6. SNMP Inform Commands
- 5.4.7. Secure Shell (SSH) Commands
- 5.4.7.1. show ip ssh
- 5.4.7.2. show ip ssh user-public-key current-user
- 5.4.7.3. show ip ssh user-public-key who-has-key
- 5.4.7.4. ip ssh
- 5.4.7.5. no ip ssh
- 5.4.7.6. ip ssh maxsessions
- 5.4.7.7. no ip ssh maxsessions
- 5.4.7.8. ip ssh port
- 5.4.7.9. no ip ssh port
- 5.4.7.10. ip ssh timeout
- 5.4.7.11. no ip ssh timeout
- 5.4.7.12. ip ssh user-password-auth
- 5.4.7.13. no ip ssh user-password-auth
- 5.4.7.14. ip ssh user-public-key-auth
- 5.4.7.15. no ip ssh user-public-key-auth
- 5.4.8. Management Security Commands
- 5.4.9. DHCP Client Commands
- 5.4.10. sfFlow Commands
- 5.4.10.1. show sflow agent
- 5.4.10.2. show sflow pollers
- 5.4.10.3. show sflow receivers
- 5.4.10.4. show sflow samplers
- 5.4.10.5. show sflow source-interface
- 5.4.10.6. sflow receiver maximum datagram
- 5.4.10.7. no sflow receiver maxdatagram
- 5.4.10.8. sflow receiver owner
- 5.4.10.9. no sflow receiver
- 5.4.10.10. sflow receiver ip
- 5.4.10.11. no sflow receiver
ip - 5.4.10.12. sflow receiver port
- 5.4.10.13. no sflow receiver
port - 5.4.10.14. sflow poller interval
- 5.4.10.15. no sflow poller interval
- 5.4.10.16. sflow sampler index
- 5.4.10.17. no sflow sampler
- 5.4.10.18. sflow poller index
- 5.4.10.19. no sflow poller
- 5.4.10.20. sflow source-interface
- 5.4.10.21. no sflow source-interface
- 5.4.10.22. sflow sampler rate
- 5.4.10.23. no sflow sampler rate
- 5.4.10.24. sflow sampler maxheadersize
- 5.4.10.25. no sflow sampler maxheadersize
- 5.4.11. Service Port Commands
- 5.4.11.1. show serviceport
- 5.4.11.2. show serviceport ipv6 dhcp statistics
- 5.4.11.3. show serviceport ipv6 neighbors
- 5.4.11.4. serviceport ip
- 5.4.11.5. serviceport protocol
- 5.4.11.6. serviceport ipv6 enable
- 5.4.11.7. no serviceport ipv6 enable
- 5.4.11.8. serviceport ipv6 address
- 5.4.11.9. no serviceport ipv6 address
- 5.4.11.10. serviceport ipv6 gateway
- 5.4.11.11. no serviceport ipv6 gateway
- 5.4.11.12. clear serviceport ipv6 dhcp statistics
- 5.4.11.13. serviceport ipv6 neighbor
- 5.4.11.14. no serviceport ipv6 neighbor
- 5.4.12. Time Range Commands
- 5.4.13. Command Scheduler Commands
- 5.4.14. Switch Database Management Template Commands
- 5.4.15. Remote Monitoring Commands
- 5.4.15.1. show rmon alarms
- 5.4.15.2. show rmon collection history
- 5.4.15.3. show rmon events
- 5.4.15.4. show rmon history
- 5.4.15.5. show rmon log
- 5.4.15.6. show rmon statistics interfaces
- 5.4.15.7. show rmon hcalarms
- 5.4.15.8. rmon alarm
- 5.4.15.9. no rmon alarm
- 5.4.15.10. rmon hcalarm
- 5.4.15.11. no rmon hcalarm
- 5.4.15.12. rmon event
- 5.4.15.13. no rmon event
- 5.4.15.14. rmon collection history
- 5.4.15.15. no rmon collection history
- 5.4.16. Statistics Application Commands
- 5.4.1. Network Commands
- 5.5. Spanning Tree Protocol Commands
- 5.5.1. show spanning-tree
- 5.5.2. show spanning-tree interface
- 5.5.3. show spanning-tree vlan
- 5.5.4. show spanning-tree mst detailed
- 5.5.5. show spanning-tree mst summary
- 5.5.6. show spanning-tree mst port detailed
- 5.5.7. show spanning-tree mst port summary
- 5.5.8. show spanning-tree summary
- 5.5.9. show spanning-tree brief
- 5.5.10. spanning-tree
- 5.5.11. no spanning-tree
- 5.5.12. spanning-tree bpdu-forwarding
- 5.5.13. no spanning-tree bpdu-forwarding
- 5.5.14. spanning-tree protocol-migration
- 5.5.15. spanning-tree configuration name
- 5.5.16. no spanning-tree configuration name
- 5.5.17. spanning-tree configuration revision
- 5.5.18. no spanning-tree configuration revision
- 5.5.19. spanning-tree mode
- 5.5.20. no spanning-tree mode
- 5.5.21. spanning-tree forward-time
- 5.5.22. no spanning-tree forward-time
- 5.5.23. spanning-tree max-age
- 5.5.24. no spanning-tree max-age
- 5.5.25. spanning-tree forward-time max-age
- 5.5.26. spanning-tree max-hops
- 5.5.27. no spanning-tree max-hops
- 5.5.28. spanning-tree hold-count
- 5.5.29. no spanning-tree hold-count
- 5.5.30. spanning-tree mst instance
- 5.5.31. no spanning-tree mst instance
- 5.5.32. spanning-tree mst priority
- 5.5.33. no spanning-tree mst priority
- 5.5.34. spanning-tree mst vlan
- 5.5.35. no spanning-tree mst vlan
- 5.5.36. spanning-tree mst
- 5.5.37. no spanning-tree mst
- 5.5.38. spanning-tree port mode
- 5.5.39. no spanning-tree port mode
- 5.5.40. spanning-tree port model all
- 5.5.41. no spanning-tree port mode all
- 5.5.42. spaning-tree auot-edge
- 5.5.43. no spanning-tree auto-edge
- 5.5.44. spanning-tree cost
- 5.5.45. no spanning-tree cost
- 5.5.46. spanning-tree edgeport
- 5.5.47. no spanning-tree edgeport
- 5.5.48. spanning-tree edgeport bpduguard
- 5.5.49. no spanning-tree edgeport bpduguard
- 5.5.50. spanning-tree bpduguard
- 5.5.51. no spanning-tree bpduguard
- 5.5.52. spanning-tree guard
- 5.5.53. no spanning-tree guard
- 5.5.54. spanning-tree tcnguard
- 5.5.55. no spanning-tree tcnguard
- 5.6. System Log Commands
- 5.6.1. show logging
- 5.6.2. show logging buffered
- 5.6.3. logging buffered
- 5.6.4. logging buffered threshold
- 5.6.5. logging buffered severity level
- 5.6.6. logging buffered wrap
- 5.6.7. clear logging buffered
- 5.6.8. show logging traplogs
- 5.6.9. show logging hosts
- 5.6.10. logging host
- 5.6.11. logging host remove
- 5.6.12. logging host reconfigure
- 5.6.13. logging syslog
- 5.6.14. logging syslog port
- 5.6.15. logging syslog facility
- 5.6.16. logging syslog source-interface
- 5.6.17. logging console
- 5.6.18. logging console severity level
- 5.6.19. logging monitor
- 5.6.20. logging monitory severity level
- 5.6.21. show logging cli-command-log
- 5.6.22. logging cli-command
- 5.6.23. clear cli-command-log
- 5.7. Email Alert and Mail Server Commands
- 5.7.1. show logging email config
- 5.7.2. show logging email statistics
- 5.7.3. show mail-server config
- 5.7.4. logging email
- 5.7.5. logging email urgent and non-urgent
- 5.7.6. logging email logtime
- 5.7.7. logging email message-type and subject
- 5.7.8. logging email message-type and to-addr
- 5.7.9. logging email from-addr
- 5.7.10. mail-server configuration
- 5.7.11. mail-server security
- 5.7.12. mail-server port
- 5.7.13. mail-server username
- 5.7.14. mail-server password
- 5.7.15. clear logging email statistics
- 5.8. Script Management Commands
- 5.9. User Account Management Commands
- 5.9.1. show users
- 5.9.2. show users long
- 5.9.3. show users accounts
- 5.9.4. show passwords configuration
- 5.9.5. show passwords result
- 5.9.6. username
- 5.9.7. no username
- 5.9.8. username
unlock - 5.9.9. passwords aging
- 5.9.10. no passwords aging
- 5.9.11. passwords history
- 5.9.12. no passwords history
- 5.9.13. passwords lock-out
- 5.9.14. no passwords lock-out
- 5.9.15. passwords min-length
- 5.9.16. no passwords min-length
- 5.9.17. passwords strength-check
- 5.9.18. no passwords strength-check
- 5.9.19. passwords strength maximum
- 5.9.20. no passwords strength maximum
- 5.9.21. passwords strength minimum
- 5.9.22. no passwords strength minimum
- 5.9.23. passwords strength exclude-keyword
- 5.9.24. no passwords strength exclude-keyword
- 5.9.25. show users login-history
- 5.9.26. user password override-complexity-check
- 5.9.27. user role
- 5.10. Port-based Network Access Control Commands
- 5.10.1. show authentication methods
- 5.10.2. show dot1x
- 5.10.3. show dot1x authentication-history
- 5.10.4. show dot1x clients
- 5.10.5. show dot1x users
- 5.10.6. aaa authentication dot1x default
- 5.10.7. no aaa authentication dot1x default
- 5.10.8. clear dot1x statistics
- 5.10.9. clear dot1x authentication-history
- 5.10.10. clear RADIUS statistics
- 5.10.11. dot1x eapolflood
- 5.10.12. no dot1x eapolflood
- 5.10.13. dot1x dynamic-vlan enable
- 5.10.14. no dot1x dynamic-vlan enable
- 5.10.15. dot1x guest-vlan
- 5.10.16. no dot1x guest-vlan
- 5.10.17. dot1x initialize
- 5.10.18. dot1x mac-auth-bypass
- 5.10.19. no dot1x mac-auth-bypass
- 5.10.20. dot1x max-req
- 5.10.21. no dot1x max-req
- 5.10.22. dot1x max-users
- 5.10.23. no dot1x max-users
- 5.10.24. dot1x port-control
- 5.10.25. no dot1x port-control
- 5.10.26. dot1x port-control all
- 5.10.27. no dot1x port-control all
- 5.10.28. dot1x re-authenticate
- 5.10.29. dot1x re-authentication
- 5.10.30. no dot1x re-authentication
- 5.10.31. dot1x system-auth-control
- 5.10.32. no dot1x system-auth-control
- 5.10.33. dot1x timeout
- 5.10.34. no dot1x timeout
- 5.10.35. dot1x unauthenticated-vlan
- 5.10.36. no dot1x unauthenticated-vlan
- 5.10.37. dot1x user
- 5.10.38. no dot1x user
- 5.11. AAA Commands
- 5.12. RADIUS Commands
- 5.12.1. show radius
- 5.12.2. show radius accounting
- 5.12.3. show radius servers
- 5.12.4. show radius statistics
- 5.12.5. show radius source-interface
- 5.12.6. authentication network radius
- 5.12.7. no authorization network radius
- 5.12.8. clear radius dynamic-author statistics
- 5.12.9. radius accounting mode
- 5.12.10. no radius accounting mode
- 5.12.11. radius server attribute 4
- 5.12.12. no radius server attribute 4
- 5.12.13. radius server attribute 95
- 5.12.14. no radius server attribute 95
- 5.12.15. radius server attribute mschapv2
- 5.12.16. no radius server attribute mschapv2
- 5.12.17. radius server deadtime
- 5.12.18. no radius server deadtime
- 5.12.19. radius server host
- 5.12.20. no radius server host
- 5.12.21. radius server host link-local
- 5.12.22. no radius server host link-local
- 5.12.23. radius server key
- 5.12.24. radius server primary
- 5.12.25. radius server retransmit
- 5.12.26. no radius server retransmit
- 5.12.27. radius server timeout
- 5.12.28. no radius server timeout
- 5.12.29. radius source-interface
- 5.12.30. no radius source-interface
- 5.13. TACACS+ Commands
- 5.13.1. show tacacs
- 5.13.2. show tacacs source-interface
- 5.13.3. tacacs-server host
- 5.13.4. tacacs-server host link-local
- 5.13.5. no tacacs-server host link-local
- 5.13.6. tacacs-server key
- 5.13.7. no tacacs-server key
- 5.13.8. tacacs-server keystring
- 5.13.9. tacacs-server timeout
- 5.13.10. no tacacs-server timeout
- 5.13.11. key
- 5.13.12. no key
- 5.13.13. keystring
- 5.13.14. port
- 5.13.15. no port
- 5.13.16. priority
- 5.13.17. no priority
- 5.13.18. timeout
- 5.13.19. no timeout
- 5.13.20. tacacs-server source-interface
- 5.13.21. no tacacs-server source-interface
- 5.13.22. clear tacacs
- 5.14. Security Commands
- 5.14.1. show port-security
- 5.14.2. show port-security dynamic
- 5.14.3. show port-security static
- 5.14.4. show port-security violation
- 5.14.5. port-security
- 5.14.6. no port-security
- 5.14.7. port-security max-dynamic
- 5.14.8. no port-security max-dynamic
- 5.14.9. port-security max-static
- 5.14.10. no port-security max-static
- 5.14.11. port-security mac-address
- 5.14.12. no port-security mac-address
- 5.14.13. port-security mac-address move
- 5.14.14. port-security mac-address sticky
- 5.14.15. no port-security mac-address sticky
- 5.14.16. port-security violation shutdown
- 5.14.17. no port-security violation
- 5.15. LLDP (Link Layer Discovery Protocol) Commands
- 5.15.1. show lldp
- 5.15.2. show lldp interface
- 5.15.3. show lldp statistics
- 5.15.4. show lldp remote-device
- 5.15.5. show lldp remote-device detail
- 5.15.6. show lldp local-device
- 5.15.7. show lldp local-device detail
- 5.15.8. show lldp dcbx interface
- 5.15.9. show lldp tlv-select interface
- 5.15.10. show lldp remote-comparison
- 5.15.11. lldp notification
- 5.15.12. no lldp notification
- 5.15.13. lldp notification-interval
- 5.15.14. no lldp notification-interval
- 5.15.15. lldp receive
- 5.15.16. no lldp receive
- 5.15.17. lldp transmit
- 5.15.18. no lldp transmit
- 5.15.19. lldp transmit-mgmt
- 5.15.20. no lldp transmit-mgmt
- 5.15.21. lldp transmit-tlv
- 5.15.22. no lldp transmit-tlv
- 5.15.23. lldp timers
- 5.15.24. no lldp timers
- 5.15.25. lldp tx-delay
- 5.15.26. no lldp tx-delay
- 5.15.27. lldp dcbx version
- 5.15.28. no lldp dcbx version
- 5.15.29. lldp dcbx port-role
- 5.15.30. no lldp dcbx port-role
- 5.15.31. lldp tlv-select dcbxp
- 5.15.32. no lldp tlv-select
- 5.15.33. lldp mgmt-address
- 5.15.34. no lldp mgmt-address
- 5.15.35. lldp portid-subtype
- 5.15.36. no lldp portid-subtype
- 5.15.37. data-center-bridging
- 5.16. System Utilities
- 5.16.1. Clear
- 5.16.1.1. clear arp
- 5.16.1.2. clear traplog
- 5.16.1.3. clear eventlog
- 5.16.1.4. clear logging buffered
- 5.16.1.5. clear config
- 5.16.1.6. clear pass
- 5.16.1.7. clear counters
- 5.16.1.8. clear vlan
- 5.16.1.9. clear igmp snooping
- 5.16.1.10. clear ip filter
- 5.16.1.11. clear dot1x authentication-history
- 5.16.1.12. clear radius statistics
- 5.16.1.13. clear host
- 5.16.1.14. clear port-security dynamic
- 5.16.1.15. clear ip arp-cache
- 5.16.1.16. clear lldp statistics
- 5.16.1.17. clear lldp remote-data
- 5.16.1.18. clear ipv6 neighbors
- 5.16.1.19. clear ipv6 statistics
- 5.16.1.20. clear ipv6 dhcp statistics
- 5.16.1.21. clear ipv6 dhcp statistics per interface
- 5.16.1.22. enable password
- 5.16.1.23. clear cpu-traffic counters
- 5.16.1.24. clear cpu-traffic traces
- 5.16.1.25. clear default interface
- 5.16.1.26. clear network ipv6 dhcp statistics
- 5.16.2. copy
- 5.16.3. delete
- 5.16.4. erase application
- 5.16.5. erase startup-config
- 5.16.6. erase user public key
- 5.16.7. dir
- 5.16.8. show bootvar
- 5.16.9. Ping Commands
- 5.16.10. Traceroute
- 5.16.11. reload
- 5.16.12. configure
- 5.16.13. disconnect
- 5.16.14. hostname
- 5.16.15. quit
- 5.16.16. AutoInstall commands
- 5.16.16.1. show autoinstall
- 5.16.16.2. boot-system autoinstall
- 5.16.16.3. boot-system host autoinstall
- 5.16.16.4. no boot-system host autoinstall
- 5.16.16.5. boot-system host autosave
- 5.16.16.6. no boot-system host autosave
- 5.16.16.7. boot-system host autoreboot
- 5.16.16.8. no boot-system host autoreboot
- 5.16.16.9. boot-system host upgrade
- 5.16.16.10. no boot-system host upgrade
- 5.16.16.11. boot-system host retrycount
- 5.16.17. Capture CPU packet commands
- 5.16.18. set clibanner
- 5.16.19. no set clibanner
- 5.16.20. show clibanner
- 5.16.21. Link-Flap commands
- 5.16.22. Loop Detection commands
- 5.16.23. In-Service Software Upgrade
- 5.16.24. file verify
- 5.16.1. Clear
- 5.17. DHCP Snooping Commands
- 5.17.1. show ip dhcp snooping
- 5.17.2. show ip dhcp snooping per interface
- 5.17.3. show ip dhcp snooping binding
- 5.17.4. show ip dhcp snooping database
- 5.17.5. show ip dhcp snooping information all
- 5.17.6. show ip dhcp snooping information statistics
- 5.17.7. show ip dhcp snooping information agent-option
- 5.17.8. show ip dhcp snooping information per vlan
- 5.17.9. show ip dhcp snooping information circuit-id
- 5.17.10. show ip dhcp snooping information remote-id
- 5.17.11. show ip dhcp snooping information interface
- 5.17.12. ip dhcp snooping
- 5.17.13. ip dhcp snooping vlan
- 5.17.14. ip dhcp snooping verify mac-address
- 5.17.15. ip dhcp snooping database
- 5.17.16. ip dhcp snooping database write-delay
- 5.17.17. ip dhcp snooping binding
- 5.17.18. ip dhcp snooping information option
- 5.17.19. ip dhcp snooping information option circuit-id
- 5.17.20. ip dhcp snooping information option remote-id
- 5.17.21. ip dhcp snooping information option vlan
- 5.17.22. ip dhcp snooping information option trust
- 5.17.23. ip dhcp snooping limit
- 5.17.24. ip dhcp snooping log-invalid
- 5.17.25. ip dhcp snooping trust
- 5.17.26. ip dhcp snooping trust
- 5.17.27. clear ip dhcp snooping binding
- 5.17.28. clear ip dhcp snooping statistics
- 5.17.29. clear ip dhcp snooping information statistics
- 5.18. IP Source Guard (ISG) Commands
- 5.19. Dynamic ARP Instpection (DAI) Command
- 5.19.1. Show commands
- 5.19.2. Configuration commands
- 5.19.2.1. ip arp inspection validate
- 5.19.2.2. ip arp inspection vlan
- 5.19.2.3. ip arp inspection vlan logging
- 5.19.2.4. ip arp inspection filter
- 5.19.2.5. ip arp inspection trust
- 5.19.2.6. ip arp inspection limit
- 5.19.2.7. arp access-list
- 5.19.2.8. permit ip host mac host
- 5.19.2.9. clear ip arp inspection statistics
- 5.20. Differenciated Service Commands
- 5.20.1. General commands
- 5.20.2. Class commands
- 5.20.2.1. class-map
- 5.20.2.2. no class-map
- 5.20.2.3. rename
- 5.20.2.4. match any
- 5.20.2.5. match class-map
- 5.20.2.6. no match class-map
- 5.20.2.7. match cos
- 5.20.2.8. match secondary-cos
- 5.20.2.9. match destination-address mac
- 5.20.2.10. match dstip
- 5.20.2.11. match dstI4port
- 5.20.2.12. match ethertype
- 5.20.2.13. match ip dscp
- 5.20.2.14. match ip precedence
- 5.20.2.15. match ip tos
- 5.20.2.16. match protocol
- 5.20.2.17. match source-address mac
- 5.20.2.18. match scrip
- 5.20.2.19. match srcI4port
- 5.20.2.20. match vlan
- 5.20.2.21. match secondary-vlan
- 5.20.2.22. match dstipv6
- 5.20.2.23. match srcipv6
- 5.20.2.24. match ip6flowlbl
- 5.20.3. Policy commands
- 5.20.3.1. assign-queue
- 5.20.3.2. drop
- 5.20.3.3. mirror
- 5.20.3.4. redirect
- 5.20.3.5. conform-color
- 5.20.3.6. mark cos
- 5.20.3.7. mark cos-as-sec-cos
- 5.20.3.8. class
- 5.20.3.9. no class
- 5.20.3.10. mark ip-dscp
- 5.20.3.11. mark ip-precedence
- 5.20.3.12. police-simple
- 5.20.3.13. police-single-rate
- 5.20.3.14. police-two-rate
- 5.20.3.15. policy-map
- 5.20.3.16. policy-map rename
- 5.20.4. Service commands
- 5.20.5. Show commands
- 5.21. ACL Commands
- 5.21.1. Show commands
- 5.21.2. Configuration commands
- 5.21.2.1. mac access-list extended
- 5.21.2.2. mac access-list extended rename
- 5.21.2.3. mac access-list resequence
- 5.21.2.4. mac access-list
- 5.21.2.5. mac access-group
- 5.21.2.6. ip access-list
- 5.21.2.7. ip access-list rename
- 5.21.2.8. ip access-list resequence
- 5.21.2.9. access-list (ip)
- 5.21.2.10. no access-list
- 5.21.2.11. ip access-group
- 5.21.2.12. no ip access-group
- 5.21.2.13. {deny|permit}
- 5.22. IPv6 ACL Commands
- 5.23. CoS (Class of Service) Command
- 5.24. iSCSI Optimization Commands
- 5.25. Domain Name Server Client Commands
- 5.25.1. show hosts
- 5.25.2. ip host
- 5.25.3. no ip host
- 5.25.4. clear host
- 5.25.5. ip domain-name
- 5.25.6. no ip domain-name
- 5.25.7. ip domain-list
- 5.25.8. no ip domain-list
- 5.25.9. ip name-server
- 5.25.10. no ip name-server
- 5.25.11. ip name-server source-interface
- 5.25.12. no ip name-server source-interface
- 5.25.13. ip domain-lookup
- 5.25.14. no ip domain-lookup
- 5.25.15. ip domain-retry
- 5.25.16. no ip domain-retry
- 5.25.17. ip domain-retry-timeout
- 5.25.18. no ip domain-retry-timeout
- 5.25.19. ipv6 host
- 5.25.20. no ipv6 host
- 5.26. Unidirectional Link Detection Commands
- 5.26.1. udld enable (Global Config)
- 5.26.2. no udld enable (Global Config)
- 5.26.3. udld message time
- 5.26.4. no udld message time
- 5.26.5. udld timeout interval
- 5.26.6. no udld timeout interval
- 5.26.7. udld enable (Interface Config)
- 5.26.8. no udld enable (Interface Config)
- 5.26.9. udld port
- 5.26.10. udld reset
- 5.26.11. show udld
- 5.27. Multi-chassis Link Aggregation Commands
- 5.27.1. mlag
- 5.27.2. no mlag
- 5.27.3. mlag domain
- 5.27.4. no mlag domain
- 5.27.5. mlag system-mac
- 5.27.6. no mlag system-mac
- 5.27.7. mlag system-priority
- 5.27.8. no mlag system-priority
- 5.27.9. mlag role priority
- 5.27.10. no mlag role priority
- 5.27.11. mlag peer-link
- 5.27.12. no mlag peer-link
- 5.27.13. mlag id
- 5.27.14. no mlag id
- 5.27.15. mlag peer detection interval
- 5.27.16. no mlag peer detection interval
- 5.27.17. mlag peer-keepalive destination
- 5.27.18. no mlag peer-keepalive destination
- 5.27.19. mlag peer-keepalive enable
- 5.27.20. no mlag peer-keepalive enable
- 5.27.21. mlag peer-keepalive timeout
- 5.27.22. no mlag peer-keepalive timeout
- 5.27.23. show mlag brief
- 5.27.24. show mlag
- 5.27.25. show mlag role
- 5.27.26. show mlag consistency-parameters
- 5.27.27. show mlag peer-keepalive
- 5.27.28. show mlag statistics
- 5.27.29. show mlag core-config
- 5.27.30. clear mlag statistics
- 5.28. Control Plane Policing Commands
- 5.29. VXLAN and RIOT Commands
- 5.29.1. vxlan mode
- 5.29.2. no vxlan mode
- 5.29.3. vxlan source-interface
- 5.29.4. no vxlan source-interface
- 5.29.5. vxlan udp-port
- 5.29.6. no vxlan udp-port
- 5.29.7. vxlan unicast-group
- 5.29.8. no vxlan unicast-group
- 5.29.9. default vxlan multicast-group
- 5.29.10. no vxlan default-multicast-group
- 5.29.11. vxlan vni multicast-group
- 5.29.12. no vxlan vni multicast-group
- 5.29.13. vxlan vlan vni
- 5.29.14. no vxlan vlan vni
- 5.29.15. interface vxlan
- 5.29.16. show vxlan
- 5.29.17. show vxlan vtep
- 5.29.18. show vxlan address-table
- 5.29.19. vxlan riot
- 5.29.20. no vxlan riot
- 5.29.21. vxlan riot-physical-loopback
- 5.29.22. no vxlan riot-physical-loopback
- 5.30. Interface Error Disable and Auto Recovery
- 5.31. Role-Based Access Control
- 5.31.1. role based access control enable
- 5.31.2. no role based access control enable
- 5.31.3. role name
- 5.31.4. no role name
- 5.31.5. role description
- 5.31.6. no role description
- 5.31.7. rule command
- 5.31.8. no rule (to delete a rule of command string)
- 5.31.9. rule feature
- 5.31.10. no rule (to delete a rule of feature)
- 5.31.11. rule feature group
- 5.31.12. no rule (to delete a rule of feature group)
- 5.31.13. rule
- 5.31.14. no rule (to delete a rule of read-write commands)
- 5.31.15. rule renumber
- 5.31.16. role feature-group name
- 5.31.17. no role feature-group name
- 5.31.18. feature
- 5.31.19. no feature
- 5.31.20. username role
- 5.31.21. no username role
- 5.31.22. show role
- 5.31.23. show role feature
- 5.31.24. show role feature group
- 5.31.25. show role user
- 5.32. Application Commands
- 5.33. Precision Time Protocol Transparant Clock Commands
- 5.1. System Information and Statistics Commands
- 6. Routing Commands
- 6.1. Address Resolution Protocol (ARP) Commands
- 6.2. IP Routing Commands
- 6.2.1. Show commands
- 6.2.1.1. show ip brief
- 6.2.1.2. show ip interface port
- 6.2.1.3. show ip interface vlan
- 6.2.1.4. show ip interface lookback
- 6.2.1.5. show ip interface brief
- 6.2.1.6. show ip route
- 6.2.1.7. show ip route bestroutes
- 6.2.1.8. show ip route entry
- 6.2.1.9. show ip route connected
- 6.2.1.10. show ip route ospf
- 6.2.1.11. show ip route static
- 6.2.1.12. show ip route ecmp-groups
- 6.2.1.13. show ip route hw-failure
- 6.2.1.14. show ip route summary
- 6.2.1.15. clear ip route counters
- 6.2.1.16. show ip route preferences
- 6.2.1.17. show ip stats
- 6.2.1.18. show routing heap summary
- 6.2.1.19. show ip load-sharing
- 6.2.1.20. show bfd neighbors
- 6.2.2. Configuration commands
- 6.2.2.1. routing
- 6.2.2.2. ip routing
- 6.2.2.3. ip address
- 6.2.2.4. ip address dhcp
- 6.2.2.5. ip default-gateway
- 6.2.2.6. ip load-sharing
- 6.2.2.7. ip route
- 6.2.2.8. ip route default
- 6.2.2.9. ip route distance
- 6.2.2.10. ip route static bfd
- 6.2.2.11. ip route vrf static bfd
- 6.2.2.12. ip mtu
- 6.2.2.13. ip unnumbered gratuitous-arp accept
- 6.2.2.14. ip unnumbered loopback
- 6.2.2.15. encapsulation
- 6.2.2.16. fpti
- 6.2.1. Show commands
- 6.3. Open Shortest Path First (OSPF) Commands
- 6.3.1. Show commands
- 6.3.1.1. show ip ospf
- 6.3.1.2. show ip ospf abr
- 6.3.1.3. show ip ospf area
- 6.3.1.4. show ip ospf asbr
- 6.3.1.5. show ip ospf database
- 6.3.1.6. show ip ospf database database-summary
- 6.3.1.7. show ip ospf interface
- 6.3.1.8. show ip ospf interface brief
- 6.3.1.9. show ip ospf interface stats
- 6.3.1.10. show ip ospf neighbor
- 6.3.1.11. show ip ospf range
- 6.3.1.12. show ip ospf statistics
- 6.3.1.13. show ip ospf stub table
- 6.3.1.14. show ip ospf traffic
- 6.3.1.15. show ip ospf virtual-link
- 6.3.1.16. show ip ospf virtual-link brief
- 6.3.1.17. show ip ospf lsa-group
- 6.3.2. Configuration commands
- 6.3.2.1. router ospf
- 6.3.2.2. enable
- 6.3.2.3. network area
- 6.3.2.4. ip ospf area
- 6.3.2.5. 1583compatibility
- 6.3.2.6. area default-cost
- 6.3.2.7. area nssa
- 6.3.2.8. area nssa default-into-originate
- 6.3.2.9. area nssa no-redistribute
- 6.3.2.10. area nssa no-summary
- 6.3.2.11. area nssa translator-role
- 6.3.2.12. area nssa translator-stab-intv
- 6.3.2.13. area range
- 6.3.2.14. area stub
- 6.3.2.15. area stub no-summary
- 6.3.2.16. area virtual-link
- 6.3.2.17. area virtual-link authentication
- 6.3.2.18. area virtual-link dead-interval
- 6.3.2.19. area virtual-link hello-interval
- 6.3.2.20. area virtual-link retransmit-interval
- 6.3.2.21. area virtual-link transmit-delay
- 6.3.2.22. auto-cost reference-bandwidth
- 6.3.2.23. bfd
- 6.3.2.24. capability opaque
- 6.3.2.25. clear ip ospf
- 6.3.2.26. clear ip ospf configuration
- 6.3.2.27. clear ip ospf counters
- 6.3.2.28. clear ip ospf neighbor
- 6.3.2.29. clear ip ospf neighbor interface
- 6.3.2.30. clear ip ospf redistribution
- 6.3.2.31. clear ip ospf stub-router
- 6.3.2.32. default-information originate
- 6.3.2.33. default-metric
- 6.3.2.34. distance ospf
- 6.3.2.35. distribute-list out
- 6.3.2.36. exit-overflow-interval
- 6.3.2.37. external-lsdb-limit
- 6.3.2.38. ip ospf authentication
- 6.3.2.39. ip ospf cost
- 6.3.2.40. ip ospf dead-interval
- 6.3.2.41. ip ospf hello-interval
- 6.3.2.42. ip ospf network
- 6.3.2.43. ip ospf prefix-suppression
- 6.3.2.44. ip ospf priority
- 6.3.2.45. ip ospf retransmit-interval
- 6.3.2.46. ip ospf transmit-delay
- 6.3.2.47. ip ospf mtu-ignore
- 6.3.2.48. ip ospf bfd
- 6.3.2.49. router-id
- 6.3.2.50. redistribute
- 6.3.2.51. maximum-paths
- 6.3.2.52. passive-interface default
- 6.3.2.53. passive-interface
- 6.3.2.54. timers spf
- 6.3.2.55. max-metric
- 6.3.2.56. log-adjacency-changes
- 6.3.2.57. prefix-suppression
- 6.3.2.58. nsf helper
- 6.3.2.59. nsf helper strict-lsa-checking
- 6.3.2.60. bandwidth
- 6.3.1. Show commands
- 6.4. BOOTP/DHCP Relay Commands
- 6.5. IP Helper Commands
- 6.6. Router Discovery Protocol Commands
- 6.7. VLAN Routing Commands
- 6.8. Virtual Router Redundancy Protocol (VRRP) Commands
- 6.8.1. Show commands
- 6.8.2. Configuration commands
- 6.8.2.1. ip vrrp
- 6.8.2.2. ip vrrp master-backup
- 6.8.2.3. ip vrrp
- 6.8.2.4. ip vrrp ip
- 6.8.2.5. ip vrrp mode
- 6.8.2.6. ip vrrp accept-mode
- 6.8.2.7. ip vrrp authentication
- 6.8.2.8. ip vrrp preempt
- 6.8.2.9. ip vrrp priority
- 6.8.2.10. ip vrrp timers advertise
- 6.8.2.11. ip vrrp track interface
- 6.8.2.12. ip vrrp track ip route
- 6.9. Policy Based Routing (PBR) Commands
- 6.9.1. Show commands
- 6.9.2. Configuration commands
- 6.9.2.1. ip policy route-map
- 6.9.2.2. ip prefix-list
- 6.9.2.3. ip prefix-list description
- 6.9.2.4. ipv6 prefix-list
- 6.9.2.5. route-map
- 6.9.2.6. match as-path
- 6.9.2.7. match community
- 6.9.2.8. match ip address prefix-list
- 6.9.2.9. match ip address
- 6.9.2.10. match ipv6 address
- 6.9.2.11. match length
- 6.9.2.12. match mac-list
- 6.9.2.13. set as-path
- 6.9.2.14. set comm-list delete
- 6.9.2.15. set community
- 6.9.2.16. set interface
- 6.9.2.17. set ip next-hop
- 6.9.2.18. set ip default next-hop
- 6.9.2.19. set ip precedence
- 6.9.2.20. set ipv6 next-hop
- 6.9.2.21. set local-preference
- 6.9.2.22. set metric
- 6.9.2.23. clear ip prefix-list
- 6.9.2.24. clear ipv6 prefix-list
- 6.10. Border Gateway Protocol (BGP) Commands
- 6.10.1. Show commands
- 6.10.1.1. show ip bgp
- 6.10.1.2. show ip bgp
- 6.10.1.3. show ip bgp aggregate-address
- 6.10.1.4. show ip bgp community
- 6.10.1.5. show ip bgp community-list
- 6.10.1.6. show ip bpg filter-list
- 6.10.1.7. show ip bgp neighbors
- 6.10.1.8. show ip bgp prefix-list
- 6.10.1.9. show ip bgp route-reflection
- 6.10.1.10. show ip bgp summary
- 6.10.1.11. show ip bgp template
- 6.10.1.12. show ip bgp traffic
- 6.10.1.13. show ip bgp update-group
- 6.10.1.14. show bgp ipv6
- 6.10.1.15. show bgp ipv6
- 6.10.1.16. show bgp ipv6 aggregate-address
- 6.10.1.17. show bgp ipv6 community
- 6.10.1.18. show bgp ipv6 community-list
- 6.10.1.19. show ip bgp vpnv4
- 6.10.1.20. show ip bgp listen range
- 6.10.1.21. show ip protocols bgp
- 6.10.1.22. show bgp ipv6 filter-list
- 6.10.1.23. show bgp ipv6 neighbors
- 6.10.1.24. show bgp ipv6 route-reflection
- 6.10.1.25. show bgp ipv6 statistics
- 6.10.1.26. show bgp ipv6 summary
- 6.10.1.27. show bgp ipv6 update-group
- 6.10.1.28. show ipv6 protocols bgp
- 6.10.1.29. show bgp ipv6 listen range
- 6.10.2. Configuration commands
- 6.10.2.1. router bgp
- 6.10.2.2. enable
- 6.10.2.3. aggregate-address
- 6.10.2.4. bgp aggregate-different-meds
- 6.10.2.5. bgp always-compare-med
- 6.10.2.6. bgp bestpath as-path ignore
- 6.10.2.7. bgp client-to-client reflection
- 6.10.2.8. bgp cluster-id
- 6.10.2.9. bgp default local-preference
- 6.10.2.10. bgp fast-external-failover
- 6.10.2.11. bgp fast-internal-failover
- 6.10.2.12. bgp log-neighbor-changes
- 6.10.2.13. bgp router-id
- 6.10.2.14. bgp maxas-limit
- 6.10.2.15. bgp graceful-restart
- 6.10.2.16. bgp graceful-restart-helper
- 6.10.2.17. bgp graceful-restart restart-time
- 6.10.2.18. bgp graceful-restart stalepath-time
- 6.10.2.19. bgp listen
- 6.10.2.20. exit
- 6.10.2.21. timers bgp
- 6.10.2.22. neighbor default-originate route-map
- 6.10.2.23. neighbor inherit peer
- 6.10.2.24. neighbor local-as
- 6.10.2.25. neighbor update-source
- 6.10.2.26. neighbor description
- 6.10.2.27. neighbor ebgp-multihop
- 6.10.2.28. neighbor password
- 6.10.2.29. neighbor connect-retry-interval
- 6.10.2.30. neighbor maximum-prefix
- 6.10.2.31. neighbor next-hop-self
- 6.10.2.32. neighbor filter-list
- 6.10.2.33. neighbor prefix-list
- 6.10.2.34. neighbor remote-as
- 6.10.2.35. neighbor remove-private-as
- 6.10.2.36. neighbor route-map
- 6.10.2.37. neighbor route-reflector-client
- 6.10.2.38. neighbor shutdown
- 6.10.2.39. neighbor timers
- 6.10.2.40. neighbor advertisement-interval
- 6.10.2.41. neighbor send-community
- 6.10.2.42. neighbor send-community extended
- 6.10.2.43. neighbor active
- 6.10.2.44. neighbor rfc5549-support
- 6.10.2.45. distance
- 6.10.2.46. distance bgp
- 6.10.2.47. default-information originate
- 6.10.2.48. maximum-paths
- 6.10.2.49. default-metric
- 6.10.2.50. redistribute
- 6.10.2.51. distribute-list in
- 6.10.2.52. distribute-list out
- 6.10.2.53. ip bgp fast-external-failover {deny|permit}
- 6.10.2.54. network
- 6.10.2.55. network
/ - 6.10.2.56. template peer
- 6.10.2.57. clear ip bgp
- 6.10.2.58. clear ip bgp counters
- 6.10.2.59. ip as-path access-list
- 6.10.2.60. ip bgp-community new-format
- 6.10.2.61. ip community-list
- 6.10.2.62. show ip as-path-access-list
- 6.10.2.63. show ip community-list
- 6.10.2.64. clear ip community-list
- 6.10.2.65. rd
- 6.10.2.66. route-target
- 6.10.2.67. address-family ipv4
- 6.10.2.68. address-family ipv6
- 6.10.2.69. address-family vpnv4
- 6.10.2.70. neighbor allowas-in
- 6.10.1. Show commands
- 6.11. VRRPv3 Commands
- 6.12. Virtual Router Commands
- 6.13. Black Hole Detection (BHD) Commands
- 6.14. IP Event Dampening Commands
- 7. IP Multicast Commands
- 7.1. Internet Group Management Protocol (IGMP) Commands
- 7.1.1. Show commands
- 7.1.2. Configuration commands
- 7.1.2.1. ip igmp
- 7.1.2.2. ip igmp router-alert-check
- 7.1.2.3. ip igmp version
- 7.1.2.4. ip igmp last-member-query-count
- 7.1.2.5. ip igmp last-member-query-interval
- 7.1.2.6. ip igmp query-interval
- 7.1.2.7. ip igmp query-max-response-time
- 7.1.2.8. ip igmp robustness
- 7.1.2.9. ip igmp startup-query-count
- 7.1.2.10. ip igmp startup-query-interval
- 7.2. MLD Commands
- 7.2.1. Show commands
- 7.2.2. Configuration commands
- 7.2.2.1. ipv6 mld query-interval
- 7.2.2.2. ipv6 mld query-max-response-time
- 7.2.2.3. ipv6 mld last-member-query-interval
- 7.2.2.4. ipv6 mld last-member-query-count
- 7.2.2.5. ipv6 mld router
- 7.2.2.6. clear ipv6 mld counters
- 7.2.2.7. clear ipv6 mld traffic
- 7.2.2.8. ipv6 mld version
- 7.2.2.9. ipv6 mld reset-status
- 7.2.2.10. ipv6 mld startup-query-count
- 7.2.2.11. ipv6 mld startup-query-interval
- 7.2.2.12. ipv6 mld unsolicit-rprt-interval
- 7.3. Multicast Commands
- 7.3.1. Show commands
- 7.3.1.1. show ip mcast
- 7.3.1.2. show ip mcast boundary
- 7.3.1.3. show ip mcast interface
- 7.3.1.4. show ip mcast mroute
- 7.3.1.5. show ip mcast mroute group
- 7.3.1.6. show ip mcast mroute source
- 7.3.1.7. show ip mcast mroute static
- 7.3.1.8. show ipv6 mroute
- 7.3.1.9. show ipv6 mroute group
- 7.3.1.10. show ipv6 mroute source
- 7.3.1.11. show ipv6 mroute static
- 7.3.1.12. clear ip mroute
- 7.3.1.13. clear ipv6 mroute
- 7.3.2. Configuration commands
- 7.3.1. Show commands
- 7.4. IPv4 Protocol Independent Multicast (PIM) Commands
- 7.5. IPv6 Protocol Independent Mulitcast (PIM) Commands
- 7.5.1. Show commands
- 7.5.2. Configuration commands
- 7.5.2.1. ipv6 pim sparse
- 7.5.2.2. ipv6 pim
- 7.5.2.3. ipv6 pim hello-interval
- 7.5.2.4. ipv6 pim bsr-border
- 7.5.2.5. ipv6 pim bsr-candiate
- 7.5.2.6. ipv6 pim dr-priority
- 7.5.2.7. ipv6 pim join-prune-interval
- 7.5.2.8. ipv6 pim rp-address
- 7.5.2.9. ipv6 pim rp-candiate
- 7.5.2.10. ipv6 pim spt-threshold
- 7.5.2.11. ipv6 pim ssm
- 7.1. Internet Group Management Protocol (IGMP) Commands
- 8. IPv6 Commands
- 8.1. Tunnel Interface Commands
- 8.2. Loopback Interface Commands
- 8.3. IPv6 Routing Commands
- 8.3.1. Show commands
- 8.3.1.1. show ipv6 brief
- 8.3.1.2. show ipv6 interface
- 8.3.1.3. show ipv6 interface neighbors
- 8.3.1.4. show ipv6 protocols
- 8.3.1.5. show ipv6 route
- 8.3.1.6. show ipv6 route ecmp-groups
- 8.3.1.7. show ipv6 route hw-failure
- 8.3.1.8. show ipv6 route preferences
- 8.3.1.9. show ipv6 route summary
- 8.3.1.10. show ipv6 traffic
- 8.3.2. Configuration commands
- 8.3.2.1. ipv6 hop-limit
- 8.3.2.2. ipv6 unicast-routing
- 8.3.2.3. ipv6 enable
- 8.3.2.4. ipv6 address
- 8.3.2.5. ipv6 address autoconfig
- 8.3.2.6. ipv6 address dhcp
- 8.3.2.7. ipv6 route
- 8.3.2.8. ipv6 route distance
- 8.3.2.9. ipv6 mtu
- 8.3.2.10. ipv6 nd dad attemps
- 8.3.2.11. ipv6 nd managed-config-flag
- 8.3.2.12. ipv6 nd ns-interval
- 8.3.2.13. ipv6 nd other-config-flag
- 8.3.2.14. ipv6 nd ra-interval
- 8.3.2.15. ipv6 nd ra-lifetime
- 8.3.2.16. ipv6 nd reachable-time
- 8.3.2.17. ipv6 nd router-preference
- 8.3.2.18. ipv6 nd suppress-ra
- 8.3.2.19. ipv6 nd prefix
- 8.3.2.20. ipv6 neighbor
- 8.3.2.21. ipv6 neighbor dynamicrenew
- 8.3.2.22. ipv6 nud
- 8.3.2.23. ipv6 unreachables
- 8.3.2.24. ipv6 unresolved-traffic rate-limit
- 8.3.2.25. ipv6 icmp error-interval
- 8.3.2.26. clear ipv6 route counters
- 8.3.2.27. ipv6 nd mtu
- 8.3.1. Show commands
- 8.4. OSPFv3 Commands
- 8.4.1. Show commands
- 8.4.1.1. show ipv6 ospf
- 8.4.1.2. show ipv6 ospf abr
- 8.4.1.3. show ipv6 ospf area
- 8.4.1.4. show ipv6 ospf asbr
- 8.4.1.5. show ipv6 ospf database
- 8.4.1.6. show ipv6 ospf database database-summary
- 8.4.1.7. show ipv6 ospf interface
- 8.4.1.8. show ipv6 ospf interface brief
- 8.4.1.9. show ipv6 ospf interface stats
- 8.4.1.10. show ipv6 ospf lsa-group
- 8.4.1.11. show ipv6 ospf max-metric
- 8.4.1.12. show ipv6 ospf neighbor
- 8.4.1.13. show ipv6 ospf range
- 8.4.1.14. show ipv6 ospf statistics
- 8.4.1.15. show ipv6 ospf stub table
- 8.4.1.16. show ipv6 ospf virtual-link
- 8.4.1.17. show ipv6 ospf virtual-link brief
- 8.4.2. Configuration commands
- 8.4.2.1. ipv6 ospf
- 8.4.2.2. ipv6 ospf area
- 8.4.2.3. ipv6 ospf bfd
- 8.4.2.4. ipv6 ospf cost
- 8.4.2.5. ipv6 ospf dead-interval
- 8.4.2.6. ipv6 ospf hello-interval
- 8.4.2.7. ipv6 ospf link-lsa-suppression
- 8.4.2.8. ipv6 ospf mtu-ignore
- 8.4.2.9. ipv6 ospf network
- 8.4.2.10. ipv6 ospf prefix-suppression
- 8.4.2.11. ipv6 ospf priority
- 8.4.2.12. ipv6 ospf retransmit-interval
- 8.4.2.13. ipv6 ospf transmit-delay
- 8.4.2.14. ipv6 router ospf
- 8.4.2.15. area default-cost
- 8.4.2.16. area nssa
- 8.4.2.17. area nssa default-info-originate
- 8.4.2.18. area nssa no-redistribute
- 8.4.2.19. area nssa no-summry
- 8.4.2.20. area nssa translator-role
- 8.4.2.21. area nssa translator-stab-intv
- 8.4.2.22. area range
- 8.4.2.23. area stub
- 8.4.2.24. area stub no-summary
- 8.4.2.25. area virtual-link
- 8.4.2.26. area virtual-link dead-interval
- 8.4.2.27. area virtual-link hello-interval
- 8.4.2.28. area virtual-link retransmit-interval
- 8.4.2.29. area virtual-link transmit-delay
- 8.4.2.30. auto-cost reference-bandwidth
- 8.4.2.31. bfd
- 8.4.2.32. default-information originate
- 8.4.2.33. default-metric
- 8.4.2.34. distance ospf
- 8.4.2.35. enable
- 8.4.2.36. exit-overflow-interval
- 8.4.2.37. external-isdb-limit
- 8.4.2.38. max-metric
- 8.4.2.39. maximum-paths
- 8.4.2.40. passive-interface default
- 8.4.2.41. passive-interface
- 8.4.2.42. prefix-suppression
- 8.4.2.43. redistribute
- 8.4.2.44. router-id
- 8.4.2.45. clear ipv6 ospf
- 8.4.2.46. clear ipv6 ospf configuration
- 8.4.2.47. clear ipv6 ospf counters
- 8.4.2.48. clear ipv6 ospf neighbor
- 8.4.2.49. clear ipv6 ospf neighbor interface
- 8.4.2.50. clear ipv6 ospf redistribution
- 8.4.2.51. clear ipv6 ospf stub-router
- 8.4.1. Show commands
- 8.5. Routing Policy Commands
- 8.6. DHCPv6 Snooping Commands
- 8.6.1. show ipv6 dhcp snooping
- 8.6.2. show ipv6 dhcp snooping per interface
- 8.6.3. show ipv6 dhcp snooping binding
- 8.6.4. show ipv6 dhcp snooping database
- 8.6.5. ipv6 dhcp snooping
- 8.6.6. ipv6 dhcp snooping vlan
- 8.6.7. ipv6 dhcp snooping verify mac-address
- 8.6.8. ipv6 dhcp snooping database
- 8.6.9. ipv6 dhcp snooping database write-delay
- 8.6.10. ipv6 dhcp snooping binding
- 8.6.11. ipv6 dhcp snooping limit
- 8.6.12. ipv6 dhcp snooping log-invalid
- 8.6.13. ipv6 dhcp snooping trust
- 8.6.14. clear ipv6 dhcp snooping binding
- 8.6.15. clear ipv6 dhcp snooping statistics
- 8.6.16. show ipv6 dhcp snooping statistics
- 8.6.17. show ipv6 dhcp binding
- 8.6.18. clear ipv6 dhcp binding
- 8.7. DHCPv6 Commands
- 9. Data Center Bridging Commands
- 9.1. FIP Snooping
- 9.1.1. show fip-snooping
- 9.1.2. show fip-snooping enode
- 9.1.3. show fip-snooping sessions
- 9.1.4. show fip-snooping fcf
- 9.1.5. show fip-snooping vlan
- 9.1.6. show fip-snooping statistics
- 9.1.7. feature fip-snooping
- 9.1.8. fip-snooping enable
- 9.1.9. fip-snooping fc-map
- 9.1.10. fip-snooping port-mode fcf
- 9.1.11. clear fip-snooping statistics
- 9.2. Priority-based Flow Control
- 9.3. OpenFlow
- 9.3.1. show openflow
- 9.3.2. show openflow configured controller
- 9.3.3. show openflow installed flows
- 9.3.4. show openflow installed groups
- 9.3.5. show openflow table-status
- 9.3.6. openflow enable
- 9.3.7. openflow static-ip
- 9.3.8. openflow controller
- 9.3.9. openflow ip-mode
- 9.3.10. openflow passive-mode
- 9.3.11. openflow failmode
- 9.3.12. clear openflow ca-cert
- 9.1. FIP Snooping
- 10. Fluentd Commands
- 11. SDVoE Commands
- 12. Serviceability Packet Tracing Commands
- 12.1. CPU Traffic Commands
- 12.1.1. show cpu-traffic
- 12.1.2. show cpu-traffic interface
- 12.1.3. show cpu-traffic summary
- 12.1.4. show cpu-traffic trace
- 12.1.5. cpu-traffic direction interface
- 12.1.6. cpu-traffic direction match cust-filter
- 12.1.7. cpu-traffic direction match srcip
- 12.1.8. cpu-traffic direction match dstip
- 12.1.9. cpu-traffic direction match tcp
- 12.1.10. cpu-traffic direction match udp
- 12.1.11. cpu-traffic direction match mac
- 12.1.12. cpu-traffic direction match filter
- 12.1.13. cpu-traffic mode
- 12.1.14. cpu-traffic trace
- 12.1.15. clear cpu-traffic
- 12.2. Exception Kernel Dump Commands
- 12.3. Memory Buffer Commands
- 12.1. CPU Traffic Commands
NETGEAR M4500 Series Switches CLI Command Reference Manual 323
Rx 65to128 0/4 0
Rx 65to128 lag 1 0
Rx 128to255 0/2 4758
Rx 128to255 0/4 0
Rx 128to255 lag 1 0
Rx 256to511 0/2 0
(Routing) #show stats group port-utilization
Group: port-utilization Time Range: test Interface List
--------------
0/2, 0/4, lag 1
Interface Utilization (%)
--------- ---------------
0/2 0
0/4 0
lag 1 0
5.4.16.7. show stats flow-based
This command displays the configured time range, flow-based rule parameters and the interface list for the flow
specified.
Format show stats flow-based {rule-id | all}
Mode Privileged EXEC
Example:
The following shows examples of the command.
(Routing) #show stats flow-based all
Parameter
Definition
Rule ID
The flow-base rule ID. The range is 1 to 16. The default is None.