User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 289
DHCPv6 Malformed Packets Received.............. 0
Total DHCPv6 Packets Received.................. 0
DHCPv6 Solicit Packets Transmitted............. 0
DHCPv6 Request Packets Transmitted............. 0
DHCPv6 Renew Packets Transmitted............... 0
DHCPv6 Rebind Packets Transmitted.............. 0
DHCPv6 Release Packets Transmitted............. 0
Total DHCPv6 Packets Transmitted............... 0
5.4.11.3. show serviceport ipv6 neighbors
Use this command to display information about the IPv6 neighbor entries cached on the service port. The
information is updated to show the type of the entry.
Format show serviceport ipv6 neighbors
Default None
Mode Privileged Exec
User Exec
Display Message
Example: The following shows example CLI display output for the command.
(M4500-32C) #show serviceport ipv6 neighbors
Neighbor Age
Parameter
Definition
IPv6 Address
The IPv6 address of the neighbor.
MAC Address
The MAC Address of the neighbor.
isRtr
Shows if the neighbor is a router. If TRUE, the neighbor is a router; if FALSE, it is
not a router.
Neighbor State
The state of the neighbor cache entry. The possible values are: Incomplete,
Reachable, Stale, Delay, Probe, and Unknown.
Age
The time in seconds that has elapsed since an entry was added to the cache.
Type
The type of neighbor entry. The type is Static if the entry is manually configured
and Dynamic if dynamically resolved.