User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 278
5.4.9.6. show dhcp lease
This command is used to display the DHCP client lease parameters.
Format show dhcp lease [interface {<slot/port> | vlan <vlan-id>}]
Default None
Mode Privilege Exec
Display Message
5.4.10. sfFlow Commands
5.4.10.1. show sflow agent
The user can go to the CLI Privilege Exec to get the sFlow agent information, use the show sflow agent Privilege
command.
Format show sflow agent
Default None
DHCP Client Vendor
Identifier Option String
The string to be included in the Vendor ID Option
Parameter
Definition
IP address
The IP address allocated by DHCP server and correspond interface.
Subnet mask
The IP subnet mask allocated by DHCP server for the interface.
DHCP lease server
The IPv4 address of the DHCP server that leased the address
State
The state of the DHCP client on this interface
DHCP transaction id
The transaction ID of the DHCP client
Lease
The time (in seconds) that the IP address was leased by the server
Renewal
The time (in seconds) when the next DHCP RENEW request is sent by DHCP
client to renew the leased IP address
Rebind
The time (in seconds) when the DHCP Rebind process starts
Retry count
The number of times the DHCP client sends a DHCP REQUEST before the server
responds