User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 1006
Default Port: 24224
Send-timeout: 60s
Heartbeat-type: udp
Heartbeat-interval: 1s
Phi-threshold: 16
Buffer-type: memory
Buffer-queue-limit: 16
Buffer-chunk-limit: 8m
Flush-interval: 60s
Mode Forward configuration
10.2.11. webhdfs
This command configures webhdfs settings.
Format host-name <host name> | port <1-65535> | path <path> | advance {buffer [buffer-type {memory |
file <buffer-path>}] | buffer-queue-limit <1-16> | buffer-chunk-limit <chunk> | flush-interval <flush-
interval>}| localtime {disable | enable}
<buffer-path>
The path where buffer chunks are stored.
<1-16>
The length limit of the chunk queue.
<chunk>
The size of each buffer chunk (the value in the range <1 - 8>, and suffix k(KB) or
m(MB)).
<flush-interval>
The interval between data flushes (the value in the range <1 - 60>, and suffix
s(seconds), m(minutes), or h(hours)).
Fields
Definition
<host>
The namenode hostname.
<1-65535>
The namenode port number.
<path>
The path on HDFS.
<buffer-path>
The path where buffer chunks are stored.
<1-16>
The length limit of the chunk queue.
<chunk>
The size of each buffer chunk (the value in the range <1 - 8>, and suffix k(KB) or
m(MB)).