User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 1005
Default Time-key: current time
Time-format: %Y-%m-%d %H:%M:%S
Mode Exec configuration
10.2.9. matchpattern
This command configures fluentd match.
Format matchpattern <pattern> type {forward | webhdfs | elasticsearch}
no matchpattern <pattern>
Default None
Mode Fluentd configuration
10.2.10. forward
This command configures forward settings.
Format server {ipv4 <ipaddr> | hostname <hostname>} [<1-65535>] | advance{send-timeout <send-timeout>
| heartbeat-type {tcp | udp} | heartbeat-interval <heartbeat-interval> | phi-failure-detector {disable |
enable} | phi-threshold <1-60> | buffer {buffer-type {memory | file <buffer-path>} | buffer-queue-
limit <1-16> | buffer-chunk-limit <chunk> | flush-interval <flush-interval>}}
Fields
Definition
<pattern>
The pattern (up to 31 alphanumeric characters).
Fields
Definition
<ipaddr>
The ipv4 address of server.
<hostname>
The host name of server.
<1-65535>
The host port number.
<send-timeout>
The timeout time when sending event logs (the value in the range <1 - 60>, and
suffix s(seconds), m(minutes), or h(hours)).
<heartbeat-interval>
The interval of the heartbeat packer (the value in the range <1 - 60>, and suffix
s(seconds), m(minutes), or h(hours)).
<1-60>
The interval time between periodic program runs (the value in the range <1 - 60>,
and suffix s (seconds), m (minutes), or h (hours)).