User Manual

NETGEAR M4500 Series Switches CLI Command Reference Manual 1004
Default Severity: 5
Mode Localsyslog configuration
10.2.7. dstat
This command configures dstat settings.
Format [enable | advance [option <option> | delay <1-86400>]
no enable
Default Option: -fcdnm
Delay: 1
Mode Dstat configuration
10.2.8. exec
This command configures exec settings.
Format enable | command <command> | format {tsv <keys> | json | msgpack} | advance {tag-key <tag-key>|
time-key <time-key> [<time-format>] | run-interval <run-interval>}
no enable
Fields
Definition
<option>
The dstat option.
<1-86400>
The delay time (seconds).
Fields
Definition
<command>
The command (program) to execute.
<keys>
The comma-separated (,) keys parameter (contains alphanumeric characters,
dots (.), dashes (-), and underscores (_)).
<tag- key>
The key to use as the event tag instead of the value in the event record (up to 31
alphanumeric characters including “.“).
<time-key>
The key to use as the event time instead of the value in the event record.
<time-format>
The format of the event time used for the time_key parameter.
<run-interval>
The interval time between periodic program runs (the value in the range <1 - 60>,
and suffix s (seconds), m (minutes), or h (hours)).