User Manual

Netgear CG814W Wireless Cable Modem Gateway
heavy routing problems, and only after you have exhausted all of the other
troubleshooting options. By resetting the Gateway, you run the risk of creating
conflicts between your PCs’ actual IP Addresses and what the Gateway thinks
their IP Addresses should be. You may be forced to reboot the entire
system(s).
If your Gateway locks up, simply power it down for 5 seconds by removing the
power cable from the Gateway’s Power Port. Leaving the power off for too
long could result in the loss of network connections.
The Netgear CG814W’s Front Panel
Green. The power LED illuminates when the device is powered
on.
Red. The Diag LED illuminates when the device goes through its
self-diagnosis mode during boot-up and restart. It will turn off
upon successful completion of the diagnosis.
Green. Blinking when the USB port is activity
Green. The WLAN LED illuminates when the Wireless PC card
slide-in and activity.
1~4 Green. When a successful 100Mbps connection is made through
the corresponding port.
Yellow. When a successful 10Mbps connection is made through
the corresponding port.
Green. Steady on when cable is registered and ready to transfer
data.
Green. Blinking when user data going through the cable modem
to PC present.
7