User's Manual
Table Of Contents
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Cable Modem Router
- 3. Specify Your Internet Settings
- 4. Control Access to the Internet
- 5. Specify Network Settings
- View or Change WAN Settings
- Dynamic DNS
- Set Up a Default DMZ Server
- Change the Router’s Device Name
- Change the LAN TCP/IP Settings
- Use the Router as a DHCP Server
- Disable the DHCP Server Feature in the Router
- Manage Reserved LAN IP Addresses
- Custom Static Routes
- Specify Basic WiFi Settings
- Set Up a Guest WiFi Network
- View or Change Advanced WiFi Settings
- Enable Router Mode
- Generate a New Backhaul Password
- Check Your Internet Bandwidth
- Improve Network Connections With Universal Plug N Play
- 6. Manage Your Network
- Update the Router and Satellite Firmware
- Change the admin Password
- Set Up Password Recovery
- Recover the admin Password
- View Router Status
- View Satellite Status
- View and Manage Logs of Router Activity
- View Devices Connected to the Network
- View Satellites Connected to the Network
- Monitor Internet Traffic
- Manage the Router Configuration File
- Set Up Remote Management
- Use Remote Access
- Remotely Access Your Router Using the NETGEAR Orbi App
- 7. Customize Internet Traffic Rules for Ports
- 8. Use VPN to Access Your Network
- 9. Troubleshooting
- 10. Supplemental Information
Table 3. Cable Internet provider contact information
Contact InformationISP
http://www.cableone.net/
1-877-MY-CABLE (1-877-692-2253)
CableOne
https://www.cox.com/activate
1-800-234-3993
Cox
https://maestro.mediacomcc.com/walledgarden/page/login.jsp
1-855-Mediacom (1-855-633-4226)
Mediacom
https://install.optimum.com/JointInstall/
1-877-810-6750
Optimum
https://activate.spectrum.net/
1-(833) 267-6094
Spectrum
https://xfinity.com/activate
https://xfinity.com/Internetsetup
1-800-XFINITY (1-800-934-6489)
Xfinity
Your ISP’s contact information might change.You can find the contact information in
your monthly Internet service billing statement.
Note
To activate your Internet service:
1. Visit your ISP’s website and follow the onscreen instructions to activate your Internet service.
2. To determine the accurate Internet speed, visit your cable Internet provider's speed test website and
perform a speed test. .
If your actual speed is lower than your subscribed speed, contact your cable Internet provider.
Perform a Speed Test
To determine the accurate Internet speed, visit the speed test website of your cable Internet provider and
perform a speed test.
If your actual speed is lower than your subscribed speed, contact your cable Internet provider.
Hardware Setup
16
Orbi WiFi System