User's Manual
Table Of Contents
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Cable Modem Router
- 3. Specify Your Internet Settings
- 4. Control Access to the Internet
- 5. Specify Network Settings
- View or Change WAN Settings
- Dynamic DNS
- Set Up a Default DMZ Server
- Change the Router’s Device Name
- Change the LAN TCP/IP Settings
- Use the Router as a DHCP Server
- Disable the DHCP Server Feature in the Router
- Manage Reserved LAN IP Addresses
- Custom Static Routes
- Specify Basic WiFi Settings
- Set Up a Guest WiFi Network
- View or Change Advanced WiFi Settings
- Enable Router Mode
- Generate a New Backhaul Password
- Check Your Internet Bandwidth
- Improve Network Connections With Universal Plug N Play
- 6. Manage Your Network
- Update the Router and Satellite Firmware
- Change the admin Password
- Set Up Password Recovery
- Recover the admin Password
- View Router Status
- View Satellite Status
- View and Manage Logs of Router Activity
- View Devices Connected to the Network
- View Satellites Connected to the Network
- Monitor Internet Traffic
- Manage the Router Configuration File
- Set Up Remote Management
- Use Remote Access
- Remotely Access Your Router Using the NETGEAR Orbi App
- 7. Customize Internet Traffic Rules for Ports
- 8. Use VPN to Access Your Network
- 9. Troubleshooting
- 10. Supplemental Information
Table 1. LED descriptions
DescriptionLED
• Solid White. The cable modem router is receiving power and is functioning normally.
• Off. The cable modem router is not receiving power.
• Solid red. The cable modem router is too warm and might overheat. Power off the cable modem router,
let it cool, and move it away from heat sources (such as a TV, DVD player, or speakers).
Power
• Solid amber. One downstream channel is locked.
• Solid blue.Two or more downstream channels are locked.
• Blinking blue.The cable modem router is scanning for a downstream channel.
• Off. No downstream channel is locked.
Downstream
• Solid amber. One upstream channel is locked.
• Solid blue.Two or more upstream channels are locked.
• Blinking blue.The cable modem router is scanning for an upstream channel.
• Off. No upstream channel is locked.
Upstream
• Solid blue.The cable modem router is online.
• Blinking blue.The cable modem router is synchronizing with the cable provider’s cable modem router
termination system (CMTS).
• Off. The cable modem router is offline.
Internet
You can use the ring LED located on the top of the cable modem router to determine the sync sta
Orbi Satellite Model RBS20 LEDs
The following table describes the Power LED and Ring LED behavior for an Orbi satellite.
Hardware Setup
10
Orbi WiFi System