Owner's Manual
Table Of Contents
- User Manual
- Contents
- 1. Hardware Setup
- 2. Specify Your Internet Settings
- 3. Connect to the Network and Access the Modem Router
- 4. Control Access to the Internet
- 5. Manage Network Settings
- View or change the WAN settings
- Set up a default DMZ server
- Change the Router’s Device Name
- Change the LAN TCP/IP settings
- Specify the IP addresses that the modem router assigns
- Disable the DHCP server feature in the modem router
- Manage reserved LAN IP addresses
- Use the WPS Wizard for WiFi connections
- Specify Basic WiFi Settings
- Change the WiFi Mode
- Change the Transmission Power Control
- Change the WiFi password or the WiFi security
- Set up a guest WiFi network
- Control the WiFi radios
- Set up a WiFi schedule
- Specify WPS settings
- Enable or disable implicit beamforming
- Enable or disable airtime fairness
- Ethernet Port Aggregation
- 6. Manage Your Modem Router
- Update the router firmware
- Change the admin password
- Enable admin password recovery
- Recover the admin password
- View information about the router and the Internet and WiFi settings
- Display the statistics of the Internet port
- Check the Internet connection status
- View and manage logs of router activity
- View devices currently on the network
- View event logs
- Monitor Internet traffic
- Manage the router configuration file
- Remote access
- Remotely access your router using the Nighthawk app
- Disable LED blinking or turn off LEDs
- Set your time zone
- Set the NTP Server
- Specify ReadyDLNA media server settings
- Return the router to its factory default settings
- 7. Share USB Storage Devices Attached to the Modem Router
- USB device requirements
- Connect a USB storage device to the router
- Access a storage device connected to the router from a Windows-based computer
- Map a USB device to a Windows network drive
- Access a storage device that is connected to the router from a Mac
- Back up Windows-based computers with ReadySHARE Vault
- Back up Mac computers with Time Machine
- Enable FTP access within your network
- View network folders on a storage device
- Add a network folder on a USB storage device
- Edit a network folder on a USB storage device
- Safely remove a USB storage device
- 8. Use Dynamic DNS to Access USB Storage Devices Through the Internet
- 9. Use VPN to Access Your Network
- 10. Manage Port Forwarding and Port Triggering
- 11. Troubleshooting
- 12. Supplemental Information
- Quick Start
- Product Info
Data Sheet | CAX80
Nighthawk
®
AX8/8-Stream
WiFi 6 Cable Modem Router
PAGE 3 of 10
WiFi 6—Ready for Today and Tomorrow’s Smart Home
Introducing WiFi 6—the latest generation of WiFi that delivers four times better performance than AC WiFi.
With innovative technologies, such as Orthogonal Frequency-Division Multiple-Access (OFDMA)
§
, 4x4 Multi-User MIMO, and
intelligent scheduling, WiFi 6 delivers a huge boost in speed and total capacity. Rising to the challenges of modern smart home
demands, this new standard of WiFi is ready to support more devices with better reliability and faster speeds.
Capacity
WiFi 6 gives you improved network
capacity for more WiFi devices. Have
more fun with the uninterrupted 4K/8K
streaming, gaming, and the smart
home experience.
Speed
Get ultra-fast wireless speeds with more
connections for all devices with less
congestion. You’ll get some blazing
connection speeds of more than one
gigabit per second or more, 4K/8K
streaming, & VR/AR gaming.
Range
Experience reliable and stronger WiFi
coverage indoors and outdoors for all
your devices. High-performance antennas,
pre-optimized for best peformance, on the
router amplify WiFi signals for maximized
range and reliable coverage.