Owner's Manual
Table Of Contents
- User Manual
- Contents
- 1. Hardware Setup
- 2. Specify Your Internet Settings
- 3. Connect to the Network and Access the Modem Router
- 4. Control Access to the Internet
- 5. Manage Network Settings
- View or change the WAN settings
- Set up a default DMZ server
- Change the Router’s Device Name
- Change the LAN TCP/IP settings
- Specify the IP addresses that the modem router assigns
- Disable the DHCP server feature in the modem router
- Manage reserved LAN IP addresses
- Use the WPS Wizard for WiFi connections
- Specify Basic WiFi Settings
- Change the WiFi Mode
- Change the Transmission Power Control
- Change the WiFi password or the WiFi security
- Set up a guest WiFi network
- Control the WiFi radios
- Set up a WiFi schedule
- Specify WPS settings
- Enable or disable implicit beamforming
- Enable or disable airtime fairness
- Ethernet Port Aggregation
- 6. Manage Your Modem Router
- Update the router firmware
- Change the admin password
- Enable admin password recovery
- Recover the admin password
- View information about the router and the Internet and WiFi settings
- Display the statistics of the Internet port
- Check the Internet connection status
- View and manage logs of router activity
- View devices currently on the network
- View event logs
- Monitor Internet traffic
- Manage the router configuration file
- Remotely access your router using the Nighthawk app
- Disable LED blinking or turn off LEDs
- Set your time zone
- Set the NTP Server
- Specify ReadyDLNA media server settings
- Return the router to its factory default settings
- 7. Share USB Storage Devices Attached to the Modem Router
- USB device requirements
- Connect a USB storage device to the router
- Access a storage device connected to the router from a Windows-based computer
- Map a USB device to a Windows network drive
- Access a storage device that is connected to the router from a Mac
- Enable FTP access within your network
- View network folders on a storage device
- Add a network folder on a USB storage device
- Edit a network folder on a USB storage device
- Safely remove a USB storage device
- 8. Use Dynamic DNS to Access USB Storage Devices Through the Internet
- 9. Use VPN to Access Your Network
- 10. Manage Port Forwarding and Port Triggering
- 11. Troubleshooting
- 12. Supplemental Information
- Quick Start Guide
- Data Sheet
Data Sheet | CAX30S
Nighthawk
®
AX6/6-Stream
WiFi 6 Cable Modem Router
PAGE 8 of 10
Powerful Security on Your NETGEAR Router
ANTIVIRUS & RANSOMWARE PROTECTION—
Keeps you safe from phishing and online fraud
VULNERABILITY ASSESSMENT—Scans and
identies network security aws
BITDEFENDER SECURITY—Protects all connected devices
at home and on-the-go
STAY SAFE EVEN WHEN AWAY FROM HOME WIFI—
Stay in the know with Nighthawk App. Anywhere, anytime
NETGEAR Armor
™
NETGEAR Armor empowers you to eliminate vulnerabilities or simply know the status of your home network and devices, anytime,
anywhere. Get instant notications when malicious threats are detected, block unknown devices from joining your home network or
take action on vulnerabilities as they are discovered easily through the Nighthawk App.
netgear.com/armor
Advanced Cyber Threat Protection
netgear.com/armor
Advanced Cyber Threat Protection
BITDEFENDER VPN—Encrypts your internet connection
to keep your online activity private even while you’re on
unsecured public networks