User Manual

Specify Internet Port Settings
102
AC3200 WiFi Cable Modem Router
2. Enter http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADV
ANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering page displays.
5. Select the Port T
riggering radio button.
The page adjusts.
6. Click the Add Service button.
7. In the Service Name field, type a descriptive service name.
8. In the Service User menu, select Any
, or select Single address and enter the IP address
of one computer:
• Any (the default) allows any computer on the Internet to use this service.
• Single address restricts the service to a particular computer
.
9. Select the service type, either TCP or UDP or TCP/UDP (both).
If you are not sure, select TCP/UDP.
10. In the T
riggering Starting Port field, enter the beginning port number.
11. In the T
riggering Ending Port field, enter the ending port number.
12. Enter the inbound connection port information in the Connection T
ype, Starting Port, and
Ending Port fields.
13. Click the Apply button.
The service is now in the Portmap table. You must enable port triggering before the
modem router used port triggering for the service that you added. See the following
section.