User Manual
Table Of Contents
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Cable Modem Router
- 3. Specify Your Internet Settings
- 4. Control Access to the Internet
- 5. Share USB Devices Attached to the Cable Modem Router
- USB Storage Device Requirements
- Connect a USB Storage Device to the Cable Modem Router
- Access a USB Device Connected to the Cable Modem Router From a Windows-Based Computer
- Map a USB Device to a Windows Network Drive
- Access a USB Storage Device That Is Connected to the Cable Modem Router From a Mac
- Control Access to the USB Storage Device
- Use FTP Within the Network
- View or Change Network Folders on a USB Storage Device
- Add a Network Folder on a USB Storage Device
- Edit a Network Folder on a USB Storage Device
- Approve USB Devices
- Access the USB Storage Device Through the Internet
- Safely Remove a USB Storage Device
- 6. Share a USB Printer
- 7. Specify Network Settings
- View or Change the WAN Settings
- Set Up a Default DMZ Server
- Change the Cable Modem Router’s Device Name
- Change the LAN TCP/IP Settings
- Specify the IP Addresses That the Cable Modem Router Assigns
- Disable the DHCP Server Feature in the Cable Modem Router
- Manage LAN IP Addresses
- Improve Network Connections With Universal Plug-N-Play
- Use the WPS Wizard for WiFi Connections
- Specify Basic WiFi Settings
- Change the WiFi Security Option
- Set Up a Guest Network
- Control the WiFi Radios
- Specify WPS Settings
- Enable or Disable Router Mode
- 8. Manage Your Network
- Change the admin Password
- Set Up Password Recovery
- Recover the admin Password
- View Modem Router Status
- View Logs of Cable Modem Router Activity
- View Event Logs
- Run the Ping Utility
- Run the Traceroute Utility
- Monitor Internet Traffic
- View Devices Currently on the Network
- Manage the Cable Modem Router Configuration File
- View or Change the Cable Modem Router WiFi Channel
- Set Up and Manage Dynamic DNS
- Remote Management
- 9. Specify Internet Port Settings
- 10. Troubleshooting
- 11. Supplemental Information
7.
Make sure that you can log in to the cable modem router web interface after the
setup.
In a new web browser window, enter http://routerlogin.net or http://192.168.0.1
and then enter the cable modem router admin user name and password.
If the BASIC Home page displays, you are ready to activate your Internet service.
8. Activate your Internet service.
Even though an Internet connection is established, Internet service is available only
after you set it up with your cable Internet provider. For information about how to
activate your Internet service, see Activate Your Internet Service on page 17.
Activate Your Internet Service
Before you activate your Internet service, gather the following information:
•
Your cable Internet provider account information
•
Cable modem router model number, which is C6300v2
•
Cable modem router serial number, which is on the cable modem router label
•
Cable modem router MAC address, which is on the cable modem router label
Figure 5. Cable modem router label example
The following is contact information for cable Internet providers that support your cable
modem router.
Table 3. Cable Internet provider contact information
Contact InformationCable Internet
Provider
https://www.cableone.net/
1-877-MY-CABLE (1-877-692-2253)
CableOne
https://www.cox.com/activate
1-888-556-1193
Cox
https://maestro.mediacomcc.com/walledgarden/page/login.jsp
1-855-Mediacom (1-855-633-4226)
Mediacom
User Manual17Hardware Setup
AC1750 WiFi Cable Modem Router